Datasheet

ManualsBrandsFujitsu ManualsKVM cablesS26361-F4478-L2

System configurator and order-information guide

PRIMERGY BX920 S3 Status: 2012-06-29

S26361-F3695-E10

Independent Mode

Independent Channel Mode allows all channels to be populated in any order. No specific Memory RAS features are defined

Requires min 1 memory Module per CPU

S26361-F3695-E1 Rank Sparing Mode Installation

BIOS Setup factory preinstalled to this mode. One Rank is spare of other ranks on the same channel. Spare Rank is not shown in System Memory.

For effective capacity within a channel, please have a look below.

Supported for RDIMM / LRDIMM only.

1x per CPU Requires min 2x 1R/2R or 1x 4R modules per CPU

S26361-F3695-E2 Performance Mode Installation

BIOS Setup factory preinstalled for max. Performance, LV memory might be set to 1.5V operation. Four identical memory modules

will be equipped in one memory bank to achieve highest memory performance. All four modules are active and full capacity can be used.

Multiple of 3 identical modules to be configured per CPU

S26361-F3695-E3

Mirrored Channel Mode Installation

BIOS Setup factory preinstalled to this mode. Four identical memory modules are always equipped in one memory bank to use the

Mirrored channel Mode. Only two modules contain active data, the remain two modules contain mirrored data

Supported for RDIMM / LRDIMM only.

Multiple of 2 identical modules to be configured per CPU

na na na na na

na na

Minimum one memory module or order code per CPU = first memory

Note 1.)

Unbuffered Memory (UDIMM) no SDDC (chipkill) support Max. DDR3 memory speed depends on the memory configuration

- one DDR3 unbuffered ECC mem. Module, 1.35V (No of mem modules per channe) as well as on the CPU type.

Choose up to 6 order codes per CPU The memory channel with the lowest speed defines the speed

of all CPU channels in the system, also for the channels of the

2GB (1x2GB) 1Rx8 L DDR3-1600 U ECC S26361-F3694-E613 second CPU if configured.

4GB (1x4GB) 2Rx8 L DDR3-1600 U ECC S26361-F3694-E614

For real memory speed (depending on memory type / population),

Registered Memory (RDIMM) no SDDC (chipkill) support please check the spreadsheet "Memory speed" below

- one DDR3 registered ECC mem. Module, 1.35V

No mix with any other types of memory modules possible

Choose up to 6x for 2R per CPU

For performance reasons, we do not recommend

6x per to configure more than 8 DIMMs per CPU

CPU, max. 4GB (1x4GB) 2Rx8 L DDR3-1600 R ECC S26361-F3695-E614

2/3 modules

Registered Memory (RDIMM) with SDDC (chipkill) support

per channel - one DDR3 registered ECC mem. Module, 1.35V

1333MHz supported with up to 2DPC (6 modules/CPU)

Choose up to 6 order codes per CPU

4GB (1x4GB) 1Rx4 L DDR3-1333 R ECC S26361-F3696-E614 new due to supply

8GB (1x8GB) 2Rx4 L DDR3-1333 R ECC S26361-F3696-E615 new due to supply

2 modules Registered Memory (RDIMM) with SDDC (chipkill) support

per channel - one DDR3 registered ECC mem. Module, 1.35V

1600MHz supported with up to 2DPC (8 modules/CPU)

at 1.5V Mix of memory modules is only possible within the same group

Choose up to 6 order codes per CPU

4GB (1x4GB) 1Rx4 L DDR3-1600 R ECC S26361-F3697-E614

8GB (1x8GB) 2Rx4 L DDR3-1600 R ECC S26361-F3697-E615

16GB (1x16GB) 2Rx4 L DDR3-1600 R ECC S26361-F3697-E616

Load Reduced Memory (LRDIMM) with SDDC (chipkill) support

- one DDR3 load reduced ECC mem. Module, 1.35V

Choose up to 6 order codes per CPU

16GB (1x16GB) 4Rx4 L DDR3-1333 LR ECC S26361-F3698-E616

32GB (1x32GB) 4Rx4 L DDR3-1333 LR ECC S26361-F3698-E617

Effective Memory capacity / Rank Sparing Mode, 1 Channel populated

UDIMM

RDIMM

LRDIMM

2GB

4GB

8GB

16GB

32GB

1DPC

12GB

24GB

2DPC

4GB

12GB

24GB

28GB

56GB

Fujitsu Technology Solutions x86 PRIMERGY Server 10 of 14