FSC PRIMECENTER Rack 12U/24U/38U/46U System configurator and order-information guide October 2007 Contents Configurator diagram Configuration Examples KVM S2-1602 Switch SX30 Cables SX30 Cable Connections SX10 Cable Connections Information Config SX40 LAN Cabling Data Sheet Smart UPS General rack accessories Change Report PRIMERGY Server
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 Configuration and order process informations This document contains technical background information for the installation of servers and components into the PRIMECENTER Rack. Please use the latest version of System-Architect for configuration. The System-Architect, a configuration tool with graphical user interface, enables you to gain an overview over the required configuration even while planning the system.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 Rack-configurations with PRIMERGY systems S26361-K826-V101 S26361-K826-V102 S26361-K826-V103 S26361-K826-V104 PRIMECENTER Rack 12 U, stackable basic cabinet (670 mm) according to protection type IP00 with side panels, lockable front- and back-door. Including tilting protection Horizontal self-ventilation incl.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 Rack-configurations with PRIMERGY systems S26361-K826-V211 S26361-K826-V213 S26361-K826-V214 PRIMECENTER Rack 24 U, stackable basic cabinet (1220 mm) to protection type IP00 with side panels, lockable front- and back-door. Including tilting protection Horizontal self-ventilation PRIMECENTER Rack 38 U, stackable basic cabinet (1825 mm) to protection type IP00 with side panels, lockable front- and back-door.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 PRIMECENTER LC- Rack-configurations with PRIMERGY systems S26361-K1022-V100 S26361-K1022-V200 PRIMECENTER LC Rack 38U / 31U (31U useable for server) basic cabinet (1825 mm) according to protection type IP52 with side panels, lockable front- and back-door.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 A Build in Basic Units To ensure that a 19" PRIMERGY Server or PRIMERGY Subsystem can be mounted into the rack ex works, you have to order one of the following "mounting kits for 19" PRIMECENTER Racks" out of the relevant configurators once per Server or PRIMERGY Subsystems. Additionally per PRIMERGY Server or PRIMERGY Subsystem the service "Rack installation ex works" has to be ordered.
B System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 Accessories S26361-F2735-E1 Rotary knob as door latch replacement For replacement of the key cylinder, in order to open or close the doors of a PC-Rack without the use of keys - 2 pieces rotary knobs - 1 removal tool for key zylinder max. 1x per rack S26361-F2735-L1 Knob as substitute of PC-rack doorlock, as lose delivery to upgrade at the customer. S26361-F2735-E5 Earthing kit for PRIMECENTER Racks 1100mm + ass.
C System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 Rack Console / Keyboards S26361-K1023-V100 Rack console RC23 (1U) 17" TFT monitor with slide-in incl. keyboard DE/INT with touchpad, (Layout in german and US english) and RMK D/P/3rd P Racks telescopic rails Depth-variable from 708-786mm +/-2mm connection KB/Touchpad over PS/2 (2x) or USB (1x optional) is supported.
D System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 KVM S2 / S3 switches Analogue KVM Switches S26361-F2293-E602 Console Switch KVM S2-1602 16-port with OSD, multi-platformable 2x local, 0x IP, 1U, cascadable for connecting 16 servers to a monitor and a keyboard with an integrated touchpad or a keyboard and mouse.
E System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 KVM Sx adapters and cables S26361-F2293-E201 S26361-F2293-E202 S26361-F2293-E203 KVM S2 adapter PS/2-VGA KVM S2 adapter USB-VGA KVM S3 adapter USB2.0-VGA 2x PS/2 - VGA (Server connection) to UTP CAT 5 at the KVM S2-Switch) Connection from the mouse-/KB-/Video-Port of the server and by CAT 5 cable to the KVM Sx-switch. UTP CAT 5 cable 1x for each adapter is to order additionally.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 F Cables for PRIMERGY SX10 and SX30 If a PRIMERGY SX10 / SX30 is build in, the following cables must External SCSI cables 16Bit (wide) SCSI be selected according to the "PRIMERGY SX10 / SX30 cabling " For cabling a PRIMECENTER rack ex works, the length All cables are fixed permanently in the rack.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 G Within the basic units of PRIMECENTER racks, are no power outlets integrated. It is possible to order such power outlets as follows (1- or 3- phase power outlet), or the connections to the mains can be done via an UPS.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 H Within the basic units of PRIMECENTER racks, are no power outlets integrated. It is possible to order such power outlets as follows (1- or 3- phase power outlet), or the connections to the mains can be done via an UPS. The maximum current load for each phase may not exceed 32amp (IEC309, CEE plugs). For each Euro socket connector IEC320 C14 may 10A and for IEC320 C20 may 16A not be exceeded.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 I Configurations see UPS configurator Uninterruptible power supply for 220 V Further information to the connection configurations and the orderable APC on-line / line Interactive UPS combinations as well as reference to the estimation of the power demand of the UPS you will find in the UPS configurator. Here only the power connection possibilities of the servers are described to the UPS's.
Systemkonfigurator und Bestellinformationsleitfaden FSC PRIMECENTER Rack Status 2007-09-26 Configuration Examples KVM S2-1602 Switch Fujitsu Siemens Computers Enterprise Products - PRIMERGY Server 15 von 26
Systemkonfigurator und Bestellinformationsleitfaden FSC PRIMECENTER Rack Status 2007-09-26 Configuration Examples KVM S2-1611 Switch Fujitsu Siemens Computers Enterprise Products - PRIMERGY Server 16 von 26
Systemkonfigurator und Bestellinformationsleitfaden FSC PRIMECENTER Rack Status 2007-09-26 Configuration examples cascade with KVM S2-1602 and KVM S2-1611 switch 1 to 16 Server 1 to 16 Server S26361-F2293-E602 console switch KVM S2-1602 16-fach with OSD, multiplatform capable 2x local, 0x IP, 1HE, cascadable 1 to max 16x KVM S2-1602 S26361-F2293-E201 KVM S2 adapter PS/2-VGA S26361-F2293-E602 console switch KVM S2-1602 16-fach with OSD, multiplatform capable 2x local, 0x IP, 1HE, cascadable S26361-F22
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 Lines for connecting the PRIMERGY SX30 to a server For selecting the external cables see also overview of SCSI cables External LVD SCSI cables cables for connecting HDs to the server without installation ex works External LVD SCSI cable External LVD SCSI cable 2.0m 5.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 External SCSI cabling between PRIMERGY Server and PRIMERGY SX30 PRIMERGY Server RAID controller cable no. lengths PRIMERGY SX30 2,0 m 5.0 m 10.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 External SCSI cabling between PRIMERGY Server (Controller) and PRIMERGY SX10 PRIMERGY Server SCSI controller cable no. PRIMERGY SX10 lengths 1.5m 1.8m 5.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 System configurator and order-information guide : FibreCAT® SX40 http://extranet.fujitsu-siemens.com/vil/pc/vil/konfiguratoren/prim-konf/cnfgsx40.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 General LAN-Cabling PRIMERGY Server Length Cable- Nr.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 Information about Smart USV in the internet see: http://extranet.fujitsu-siemens.com/vil/pc/vil/primergy/components/pf_primergy_usv-dim_e.doc;internal&action=plain.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 general rack accessories S26361-F1331-L300 RMK CR additional to RMK TX200/300 S2 additional RMK incl. cable guide for mounting of TX200/300S2 / RX300S2 in PY 19" 23/42HE Classic Racks CONFIGURATION HINTS: is needed additional to the RMK shipped with the TX200/300S2 / RX300S2.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 SNP:SY-F1609L1-P Dummy panel1U for assembly in 19" rack SNP:SY-F1609L2-P Dummy panel 2U for assembly in 19" rack SNP:SY-F1609L3-P Dummy panel 3U for assembly in 19" rack SNP:SY-F1609L5-P Dummy panel 5U for assembly in 19" rack S26361-F2735-L10 Support bracket, max. load up to 50kg S26361-F2735-L15 Support bracket, max.
System configurator and order-information guide FSC PRIMECENTER Rack Status 2007-09-26 Changereport Date Ordernumber Changes 2007-09-26 2007-09-26 2007-02-28 2006-11-28 2006-10-30 2006-09-12 2006-08-21 2006-08-14 2006-08-14 S26361-F2735-E130/131 SNP:SY-F1609E1-P* Dummy panel (plastics) 1U, 2U - now available Dummy panel (metal) 1U, 2U, 3U, 5U - no longer available register: general rack accessories and Information Config SX40 added 1U cable arm, hauled - now available RMK 1 D/P/3rd P Racks telescopic