Datasheet
System configurator and order-information guide
A
FSC PRIMECENTER Rack Status 2007-09-26
Build in Basic Units
S26361-F2734-L14
To ensure that a 19" PRIMERGY Server or PRIMERGY Subsystem
Adapterkit to DC- and PC- racks
can be mounted into the rack ex works, you have to order
adaption of "old" classic- or DC- rack mounting
one of the following "mounting kits for 19" PRIMECENTER Racks"
kits to PRIMECENTER rack mounting kits
out of the relevant configurators once per e.x. 670-xx, E200, Bxx0, RC21, UPS .....
Server or PRIMERGY Subsystems. contens different adapter angles
Contains
no
adapter angles and
Additionally per PRIMERGY Server or PRIMERGY Subsystem
no cable management.
the service "Rack installation ex works" has to be ordered.
Ordering this service includes assembly of the systems,
complete cabeling and labelling of the cables.
The 12/24/38/46 U rack is delivered fully equipped, and all LC-
racks are delivered mounting kits and cabling preinstalled.
Stacked racks will be delivered separat.
The following listing is provided for information only and
gives you an overview of the available mounting kits.
For informations about build in PRIMEPOWER and LoB Storage
products, please refer to the corresponding configurator. S26361-F2xxx-Lxx
Bulk ware orders for servers/storage subsystems,
S26361-F2734-E20
Depth-variable from 710 - 815 mm you have to order the L-version.
RMK 10 D/P/3rd P Racks sliding rails for PRIMERGY SX30/S60 (3 U)
Included in basic unit
Depth-variable from 710 - 815 mm
RMK D/P/3rd P Racks sliding rails for PRIMERGY SX10 (3 U)
If a server or storage subsystem from the
3rd party rack is to be added into the PRIMECENTER Rack,
S26361-F2734-L70
Depth-variable from 704 - 790mm you have to order the following numbers:
EBS 2 D/P/3rd P Racks telescopic rails for PRIMERGY TX200/TX300 (4 U)
SNP:SY-F2262L20-P Cable management
Included in basic unit
Depth-variable from 650 - 790 mm for 19" DC- PC- Rack
RMK D/P/3rd P Racks telescopic rails for PRIMERGY RX200 (1 U)
Additionally an adapter angle has to be ordered
according to size and weight of the 19" component.
Included in basic unit
Depth-variable from 710 - 815 mm S26361-F2735-L10 adapter angle up to 50KG
RMK D/P/3rd P Racks telescopic rails for PRIMERGY RX300 (2 U)
or
S26361-F2735-L15 adapter angle up to 150KG
Included in basic unit
Depth-variable from 625 - 762 mm If you want to integrate a third party server into the
RMK D/P/3rd P Racks sliding rails for PRIMERGY RX100 (1 U)
DataCenter Rack, above mentioned positions also
have to be ordered.
Included in basic unit
Depth-variable from 625 - 762 mm In addition to the servers, you have to order the
EBS D/P/3rd P Racks telescopic rails for PRIMERGY RX600 (3 U)
original mounting kits
Included in basic unit
Depth-variable from 710 - 815 mm
EBS D/P/3rd P Racks telescopic rails for PRIMERGY RX800 (4 U)
Included in basic unit
Depth-variable from 713 - 812 mm
EBS D/P/3rd P Racks telescopic rails for PRIMERGY TX600 (5 U)
Included in basic unit
Depth-variable from 647 - 810 mm
EBS D/P/3rd P Racks telescopic rails for PRIMERGY RXI600 (4 U)
Included in basic unit
Depth-variable from 647 - 810 mm
EBS D/P/3rd P Racks telescopic rails for PRIMERGY RXI300 (2 U)
This service is to be ordered once per installable server/
storage subsystem, in order to get the server /
Included in basic unit
Depth-variable from 645 - 785 mm storage subsystem mounted into the PRIMECENTER rack.
EBS D/P/3rd P Racks sliding rails for PRIMERGY BX600 (7 U)
In case of all PRIMECENTER LC Racks, this service
has to be ordered to get the mounting kits and the cables installed.
Included in basic unit
Depth-variable from 710 - 815 mm
RMK D/P/3rd P Racks sliding rails for PRIMERGY BX300 (3 U)
SNP:SY-F1647E301-P S26361-F1647-E302 S26361-F1647-E100
Rackconfigurations with a shipping weight
Rack-mounting ex factory Rack-mounting ex factory Rack demounting server ex factory
above 250kg, if necessary, can be shipped
for all servers and subsystems only for Primergy SX10 Service fee, once per rack for better transportation without servers
RX100, RX200 All servers will be shiped seperatly installed by ordering this demounting
for PCRII: 12 - 38U, as an option service fee once per rack.
for PCRII: 46U, must-component
for LC-Rack 38U: as an option
for LC-Rack 46U: must-component
B
Fujitsu Siemens Computers Enterprise Products - PRIMERGY Server 6 von 26