Servers User's Guide
Table Of Contents
- SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI User’s Guide
- Preface
- Contents
- Figures
- CHAPTER 1 RCI Overview
- CHAPTER 2 Setup of the RCI for Operation
- 2.1 Overview of RCI Setup
- 2.2 RCI Setup for Initial Installation
- 2.2.1 RCI setup flow
- 2.2.2 Confirming RCI initialization
- . To confirm RCI initialization:
- 2.2.3 Connecting RCI cables
- 2.2.4 Making an RCI address setting
- . To specify an RCI address:
- . To confirm an RCI address:
- 2.2.5 Making an RCI construction setting
- . To make an RCI construction setting:
- . To confirm an RCI construction setting:
- 2.3 RCI Setup for Addition of an RCI I/O Unit
- 2.4 RCI Setup for Addition of an RCI Base Cabinet
- 2.4.1 RCI setup flow
- 2.4.2 Confirming RCI initialization
- . To confirm RCI initialization:
- 2.4.3 Connecting an RCI cable
- 2.4.4 Making an RCI address setting
- . To specify an RCI address:
- . To confirm the specified RCI address:
- 2.4.5 Making an RCI expansion setting
- . To make an RCI expansion setting:
- . To confirm an RCI expansion setting:
- 2.5 RCI Setup for Replacement of an RCI I/O Unit
- 2.6 RCI Setup for Replacement of an RCI Base Cabinet
- 2.6.1 RCI setup flow
- 2.6.2 Replacing an RCI host
- 2.6.3 Confirming RCI initialization
- . To confirm RCI initialization:
- 2.6.4 Connecting an RCI cable
- 2.6.5 Making an RCI address setting
- . To specify an RCI address:
- . To confirm the specified RCI address:
- 2.6.6 Making an RCI replacement setting
- . To make an RCI replacement setting:
- . To confirm an RCI replacement setting:
- CHAPTER 3 Command Reference
- CHAPTER 4 Error Status
C120-E360-06EN i
Preface
1
This manual describes the Remote Cabinet Interface (RCI) function on SPARC
®
Enterprise series servers. This manual is intended for users, specifically system
management/maintenance administrators. However, when carrying out actual
operations, authorized service personnels do it.
Be sure to also read the SPARC Enterprise M3000/M4000/M5000/M8000/M9000
Servers XSCF User’s Guide and other manuals referenced in this manual.
This section includes:
z Audience
z Glossary
z Structure and Contents of this Manual
z SPARC Enterprise Mx000 Servers Documentation
z Abbreviated References to Other Documents
z Models
z Text Conventions
z Prompt Notations
z Syntax of the Command-Line Interface (CLI)
z Fujitsu Welcomes Your Comments
Audience
This manual is intended for users, specifically SPARC Enterprise system
management/maintenance administrators. Moreover, the system administrator is
required to have the following knowledge:
-Solaris
TM
Operating System (Solaris OS) and Unix command
- SPARC Enterprise system and basic knowledge of XSCF
Glossary
For the terms used in the "SPARC Enterprise Mx000 Servers Documentation", refer
to the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Glossary.
Structure and Contents of this Manual
This manual is organized as described below: