User's Guide

Hotpads 9
Hotpads 1
Hotpads are stylus-active areas below the system display that you can use to adjust
the settings of the display and speaker settings while the system is running. Separate
hotpads are available for enabling the right mouse button function and the pen
hovering mode.
To use a hotpad, tap directly on it with the stylus. You can also press and hold the
stylus tip against the Volume and Brightness hotpads to automatically repeat the
hotpad function. The location of each hotpad is shown in Figure 1-4.
Figure 1-4 Hotpads
HDD
Access
• On State (or
flashing)
• Idle Mode
Green Displayed when hard disk drive is
accessed.
• Suspend-to-RAM
• Save-to-Disk
• Off State
Off Hard disk drive is not being
accessed.
Hovering • On State
(Hovering enabled)
Green Hovering mode is enabled
• On State
(Hovering disabled)
Off Hovering mode is disabled.
• Suspend-to-RAM
• Save-to-Disk
• Off State
Off
Table 1-1 System Status Indicators
Programmable Speaker
On/Off
Display
Select
Brightness
(8 levels)
Pen
Right
Mouse
Volume
Down
Volume
Up
Icon
Hovering