User's Guide

Connectors and Peripheral Interfaces 11
Connectors and Peripheral Interfaces 1
Connectors and peripheral interfaces on the Stylistic 3500 pen tablet allow connection
of various devices. Specific locations are illustrated in Figure 1-1 and Figure 1-2.
Table 1-2 provides a description of each peripheral connector on the Stylistic 3500
pen tablet. Each of the illustrated icons is printed on the pen tablet case.
Table 1-2 Peripheral Connectors/Interfaces
Connector/
Peripheral
Pen Tablet Icon Purpose
DC input
connector
Connect an external power source such as the AC adapter
or auto adapter.
Serial port
†
Connect an external serial device to your system.
Floppy drive
port
The floppy disk drive connector uses a special interface
that can be mated only with a Fujitsu FMWFD2 floppy disk
drive. Do not attempt to connect any other type of unit to
this connector. Contact your reseller for more information.
USB (A) Port Connect Universal Serial Bus-compliant devices to the pen
tablet. USB (B) port is located on the optional Stylistic 3500
mini-dock.
PCMCIA
CardBus slot
Install a Type II PC Card
Microphone
jack
Connect an external microphone. The internal microphone
is disabled when you plug in an external microphone.
Headphone
jack
Connect stereo headphones or powered external
speakers. The internal speaker is disabled when you plug
in external headphones or speakers.
†
Open the connector door to access these connectors.