Instruction Manual

10
Stylistic CT2000 Series CE Tablet User’s Guide – Section One
Figure 1-4. Stylistic CT2000 Series CE Tablet Features (Top Side View)
Top Side Features: 1
• Pen: The main input device that you use to execute
programs and enter data. A pen holder is built into
the tablet to store the pen when not in use.
• Barcode Scanner Port: Allows you to connect a serial
device when using an adapter. Note that this is not a
standard RS-232 connector, and must be used with a
device that has a compatible connector. This allows
you to use the system with devices such as barcode
scanners.
• PC Card slot: Allows you to install a Type I or Type II
PCMCIA Card in the system.
Figure 1-5. Stylistic CT2000 Series CE Tablet (Bottom Side View)
Bottom Side Features: 1
• Tablet Cradle Interface: Twenty-two pin connector
for docking the tablet with the optional tablet cradle.
Note that a cradle is required in order to
synchronize your tablet with another computer with
ActiveSync.
Pen HolderPC Card Slot Barcode Scanner Port
The ports and connectors on the sides of the
tablet are protected by covers. Some of the
covers are secured with small Philips screws;
the others are protected by rubber flaps. If
you remove a cover that is secured with a
screw, retain the cover and hardware in a
safe place for later reinstallation.
Tablet Cradle Interface