Instruction Manual

12
Stylistic CT2000 Series CE Tablet User’s Guide – Section One
KEY/BUTTON PAD
The Stylistic CT2000 Series CE Tablet has a handy key/
button pad that can be used for performing a variety of
functions. Reference Figure 1-8. for the location of the
various indicators, keys, and buttons; reference Table 1-
1. and Table 1-2. for a description of each item.
Figure 1-8. Key/Button Pad
Table 1-1. Power/Charging LED
Table 1-2. Keys and Buttons
FUNCTION BUTTONS
The four function buttons are located on bottom of the
key/button pad (See Figure 1-8.).
For details on using and programming the function
buttons, refer to “Programming the Function Buttons”
on page 17.
Power/Charging LED - Battery Power
System State LED State
Going into
Suspend
Green while the power button is
pressed, then the system suspends.
Resuming from
Suspend
Green, continuous while Power
button depressed, then system
resumes
Booting up Green, continuous until boot
complete
Battery Fault Red, continuous
Off The LED is off.
Power/Charging LED - AC Power
On, charging Off
On, fully charged Off
Off, charging Green, continuous
Off, fully charged Off
Battery error Red, continuous
Charging error Red, blinking
PWR
PWR
CLR
CLR
BKS
BKS
F1
F1
F2
F2
F3
F3
F4
F4
1
2
3
4
5
6
7
8
9
0
CLR
BKS
F1
F2
F3 F4
PWR
ENT
Power
Button
Enter Key
4-Way
Navigation
Keys
Decimal Point
Brightness
Button
Power/
Charging
LED
10-Key
Numeric
Keypad
Clear
Button
Backspace
Button
Function
Buttons
(F1 - F4)
Keys/Buttons
Name Function Remarks
Power
Button
Puts the system into
suspend mode, and
wakes it up.
System never goes
into a true power-off
state unless the
power on/off switch
is used (Figure 1-3.).
By suspending the
system, it remains
ready for “instant
on”.
10-Key
Numeric
Keypad
Acts like a standard
10-key numeric
keypad for doing
calculations.
For use in an open
editor, such as
WordPad.
Enter Key Acts like an Enter
key on a keyboard.
Clear
Button
Acts like a full-
screen eraser when
you are entering
data with
Transcriber.
4-Way
Navigation
Keys
Allow you to move
the cursor up or
down and left or
right.
Decimal
Point
Used in conjunction
with the numeric
keypad
Backspace
Button
Acts like the
Backspace key on a
keyboard.
Brightness
Buttons
Allows you to adjust
the brightness of the
display.
Cycles through four
levels.
Function
Buttons
Enables quick-
launch of the
assigned
applications.
The function buttons
are pre-programmed
to launch certain
applications. Refer to
“Programming the
Function Buttons”
on page 17 for the
assigned defaults.