Instruction Manual

13
Getting Started
CONNECTORS, BUTTONS, AND PERIPHERAL INTERFACES
Connectors and peripheral interfaces on the Stylistic
CT2000 Series CE Tablet allow the connection of a
variety of devices. Specific locations are illustrated in
Figures 1-2 through 1-5.
Table 1-3 provides a description of each peripheral
connector and buttons on the Stylistic CT2000 Series CE
Tablet. Each of the illustrated icons is either molded into
or printed on the tablet chassis.
Table 1-3. Peripheral Connectors/Interfaces
Connector/
Peripheral
Tablet Icon Purpose
DC input
connector
Connect the AC adapter to power the system and charge the battery.
USB Port
Connect Universal Serial Bus 1.1 devices to the Stylistic CT2000 Series
CE Tablet.
(Note that due to power constraints, there is a possibility that certain USB 1.1
devices will not operate properly with this port. If your device has its own power
adapter, it is recommended that you use it.)
PCMCIA
Card slot
Install a Type I or Type II PC Card.
Audio jack Connect an external combination 2.5 mm microphone/headphone.
Note that a typical 3.5 mm audio plug will not fit this jack because it is
specifically designed for a telephone headphone/microphone hands-
free set.
Barcode
Scanner Port
Connect a device such as a bar code scanner. Note that this is a
specialized unit, and does not use a standard RS-232 port.
Cradle
Interface Port No icon
Connect the Stylistic CT2000 Series CE Cradle or other approved
docking device. Refer to documentation accompanying the docking
device for more information.
Power button The Power button allows you to suspend tablet activity and resume
your tablet from suspend mode.
Battery Release
Lock/Latch
The battery release lock/latch allows you to remove the battery from
your system for external charging, storage, or replacement, and to lock
it into place when installed.
Reset Button RESET The recessed Reset button allows you to perform a warm boot of the
system.