Instruction Manual

57
Using Your Tablet Software
TERMINAL SERVICE SETTING
Double tapping the “Terminal service setting” icon in the
system control panel opens the Terminal Service Setting
Properties window.
When the window opens, verify that the settings are
correct, or enter the correct information.
Using only the Backup Server, “Enable settings for the
backup server” check box is displayed. If there is no check
mark in this box, all controls for this server are greyed
out.
• Prior to using the Remote Desktop
Protocol, you must first configure the
Terminal Service Settings which can be
accessed by double-clicking on the
Terminal Service Setting icon in the
Control Panel.
• If the server is not configured, the
system will suspend.
“Logon settings”, “Remote computer
sound”, “Local devices”, “Reconnect if
connection is dropped” are supported only
by Windows 2003 server.