Operation Manual

Connecting external devices
Connecting USB devices
USBports
On the USB ports, you can connect external devices tha t a lso have a USB po rt
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect
devices while your operating system is running.
USB 1.x has a maximum data transfer rate of 12 M bit/s.
USB 2.0 has a data transfer rate of up to 480 Mbit/s.
USB 3.0 has a data trans
ferrateofupto5Gbit/s.
Additional informati
on can be found in the document ation for the USB devices.
► Connect the data cable to the
external device.
► Connect the data cable to the USB
port on the Tablet PC.
or
► Conne ct the data c able to a USB
port of the cradle.
Device d rivers
USB devices will be automatically recognised an d installed by y our operating system.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Tap the symb ol for safe remo val of the h ardware.
► Select the device which you want to shut down and remove.
► Ta p OK.

Wait for the dialogue box which tells you that it is now safe to remove the device.
62 Fujitsu