Operation Manual

Troubleshooting and tips
Executing a reset
If the device no longer responds to your inputs, select one of t he following options:
Forced shut down
► Press and hold the ON/OFF switch for at le ast 4 seconds.

The device will sh ut down. You can then restart it.
Carry out a battery reset
► Shu t down the device.
If the device does not re spo nd, you may ha ve to force the shutdown,
as described in the previous section.
► D isconnect the mains adapter from the device.
► Press the increase volume button and the shortcut button at the same time.

The device performs a reset, comparable to removing the battery. You can then restart it.
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
► N ote the ID number of your device. The ID number is found on the type rating
plate on the back or underside of the casing.
► F or further clarification of the problem, contact the Service Desk for your country (see the
Service Desk list or visit the Internet at
"
http://support.ts.fujitsu.com/co ntact/servicedesk/ServiceDes kNumbe r_Int.asp"). Whe n you
do this, please have ready the ID numbe r and serial number of your system.
TheTabletPC’sdateortimeisincorrect
Summert
ime
Time, da
ylightsavings
Time not
correct
Time not
correct
Incorre
ctdate/time
Dateisi
ncorrect
Bufferb
attery,load
Cause Troubleshooting
Time and date are incorrect. ► With the BIOS-Setup-Utility, you can set the
date and time in the main menu.
Date and time are still set incorrectly after
switching on the Tablet PC.
► Please contact your sales outlet or our
Hotline/Service Desk.
68 Fujitsu