Operation Manual

Troubleshooting and tips
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is sw
itched
on and ready for operation (ref
er to the
documentation supplied with t
he printer).
The printer is not connected c
orrectly.
► Ch eck that the data cable connecting
the Table PC to the printer is properly
connected.
The printer drive r is faulty or not correctly
installed, or it is the wrong printer driver.
► Ch eck that the data cable connecting
the Tablet PC to the printer is prope rly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
The radio connectio
n to a netw ork does not work
Theradioconn ecti
ontoane tworkdoes not work
Cause Troubleshooting
The wireless compo
nent is disabled.
► Switch the radio com ponent on (see
"
Switch ing th e wireless components on and
off", Page 40).
The wireless component is enabled. De sp ite
this, the wireless connection to a network does
not work.
► Ch eck whether the radio connection is
switched on via the software.
► F urther information on using the radio
component can be found in the help files.
The battery d
ischarges too quickly
Battery:
Cause
Troubleshooting
The battery
is either too hot or too cold. In this
case the bat
tery indicator flashes.
► Bring the Tablet PC up/down to a normal
temperature again.
► If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace battery if necessary.
You may have an application r unning that
consumes a great deal of power due to frequent
accessing of the hard disk or optical d rive.
► Use the mains adapter as frequently as
possible.
The maximum brightness may have been set
for the screen.
► Re duce the brightne ss of the screen to
lower energy consumption: You will find the
setting unde r Control Panel – Hardware and
Sounds – Windows Mobility Center.
72 Fujitsu