User's Manual

Troubleshooting and tips
Restoring the hard disk content
s under Windows
Harddisk:Operatingsystem,restoring
You can reset your device to the factory defaults (so ftware) using the Fujitsu recovery solution (hard
disk-based recovery). For further information, please se e the Fujitsu Recovery Solution manual.
Alternatively, you can use the "Windows Recove ry CD" (optionally available) and t he
"Drivers & Utilities CD/DVD" to r e-install the operating system.
The instructions are p rovid ed on the case of the Recovery CD.
During the r einstall process your personal files and any installed programs
will be de lete d. We advise you to backup your files to an external hard
drive, or CD / DVD disk before you start.
► Switch the notebook on.

The following display b
riefly appe ars on the screen during start-up:
<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup
► When this message appears, press the function key
F12
.
► Insert the "Windows
Recovery CD" into the optica l drive.
► Select CD-ROM and press the Enter key.
► Follow the instruc
tions o n the screen.
After the installation you must install all the drivers again. Some installed hardware
components will not be correctly sup ported until this has been done.
► Insert the "Drivers & Utilities" CD/DVD into the optical drive. The CD starts automatically.
► Click on the Des
k Update button.
► Select Auto matic driver installation (Express) and click on Start installation.
► Follow the ins
tructions o n the screen.
► Resta rt you r notebook when the driver installation is completed.
The notebook’s date or time is incorrect
SummertimeTime,daylightsaving sTimenotcorrectTime notcorrectIn corre ctdat e/tim eDateisincorrectBufferbattery,load
Cause Troubleshooting
Time and date are incorrect. ► With the BIOS -Setup-Utility, you can set the
date and time in the main menu.
If the tim
e and date are still set incorrectly after
switchin
g on the notebook.
► Please contact your sales outlet or our
Hotline/Service Desk.
106 Fujitsu Technology Solutions