User's Manual

Troubleshooting and tips
Error messag e/cause Resolution
Extended memory failed at o ffset: xxxx Failing B its:
zzzz zzzz
When testing th e extended mem ory an error has
resulted at the address xxxx.
► Check whether the additional me
mory
module has been inserted correc
tly.
Failure Fixed Disk n
The settings of the ha rd disk drive are incorrect.
► Start the BIOS Setup (Primar
y Master
submenu) and select the corr
ect settings.
Keyboard controller error
► Switch the notebook off w
ith t h e ON/OFF
switch.
► Wait 3 - 5 s econds and switch on the
notebook again.
Keyboard error
If you are using an external keyboard:
► Check the connection and reboot the
notebook.
nn Stuck key
► Make sure that no key is pressed.
Operating system not found
► Check in the BIOS Setup whether your hard
disk has been set correctly.
► Make sure that the operating system is
installed on the corresponding drive.
Press <F1> to resume, <F2> to SETUP
This error message appears if an error occurs
during the self-test before starting the operating
system.
► Press the
F1
funct
ion key to start the
operating sys
tem.
► Press the function key
F2
to access the
BIOS Setup.
Previous boot incomplete - Default configuratio n
used Due to an error during the previous system
boot, defa ult values w e re used for certain
settings. Check the settings in the BIO S Setup.
► Press the
F1
function key when prompted
to do so.
Real time clock error
► Contact your sales outlet or our customer
service centre.
nnnnK Shad o w RAM fa iled at offset: xxxx Failing
Bits: zzzz
► Contact
your sales outlet or our customer
servic
e centre.
Syste
m battery is dead - R eplace and run SETUP
► Contact your sales outlet or our customer
service centre.
System cache error - Cache disabled
► Contact your sales outlet or our customer
service centre.
System timer error
► Cont
act your sales outlet or our customer
ser
vice centre.
112 Fujitsu Technology Solutions