User's Manual

Working with the notebook
Optical drive
Opticaldrive
This product c onta ins a light emitting diode, classified in accordance with IEC
8251:1993: LASER CLASS 1, and must therefore not be open ed.
Handling data carriers
Handling
Observe the following guidelines when ha ndling data carriers:
• Avoid touching the surface of a data c arrier. Only han dle data carriers by th eir edges.
• Always store data carriers in their cases. This will protect the da ta carrier against
being covered in dust, scratched or damaged in any other way.
• Protect your data carriers aga inst dust, mechanical vibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm data carriers in the optical drive.
When using a data c arrier of lesser quality, vibrations and reading errors may occur.
CD/DVD indicator
CD/DVDindicato
r
The CD/DVD indicator flashes when a data carrier is inserted. The indicator goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the data carrier when the indicator is unlit.
If the CD/DVD indicator does not go out after a data carrier h as been inserted, but
instead continues to flash, t his means that the drive cannot acce ss the data carrier.
Either t he dat a c arrier is damage d or dirty or you are using a da ta
carrier that the drive cannot read.
Fujitsu Technology Solutions 67