User's Manual

Working with the notebook
Removing and fitting the dust removal cover
(ventilation slot cover)
In order to ensure opt imum cooling of the components in your notebook, you
should periodically clean the ventilatio n slot of the heatsink.
This ensures optimum fan performance. You can a chieve the best cleaning
results with a small hand-held vacuum cleaner.
If necessary, you can also use a dry brush to release dust from the ventilatio n slots.
Do no t use any cleaning liquids! Ensure that no liquid enters the device.
Be sure that you do not damage the ventilation blades in the process. Do
not use any abrasives for cleaning purposes.
To avoid overheating of the device, do not remove the ventilation s lot
cover when the device is switched on.
► Prepare for removal, see chapte r "
Preparing to remove components", Page 96.
1
2
► Press and hold the lock of the ventilation
slot cover (1) and remove it from its s lot (2).
► Clean the dust chamber.
1
► Insert the v
entilation slot cover into the
slot (1) at
an angle as shown , and ensure
that you fe
el it click into place.
► Complete the removal, see chapter
"
Finishing compone nt removal", Page 102.
Fujitsu Technology Solutions 69