Installation guide

TX100 S3 Operating Manual 9
1 Introduction
The PRIMERGY TX100 S3 server is an Intel-based server for workgroups and
small networks. The server is suitable for use as a file server and also as an
application, information or Internet server.
Thanks to its highly developed hardware and software components, the
PRIMERGY TX100 S3 server offers a high level of data security and availability.
Security functions in the BIOS-Setup and on the system board protect the data
on the server against manipulation. The supported RAID levels allow the hard
disk controllers to offer error tolerance, through data redundancy, for users who
want to provide complete protection for valuable data.
Its low noise level and high energy efficiency make it ideal for office
environments.
Model lines for TX100 S3
There are two model lines for the TX100 S3 server:
– TX100 S3
– TX100 S3p
I For the European market:
You can identify the model line by the model name "TX100 S3p" printed
on the identification rating plate.
I For the Japanese market:
"TX100 S3p" is not used as the model name in the Japanese market.
You can identify the model line by the product number; The product
number "PYT10Pxxx" means TX100 S3p.
For an overview of the different features please refer to table 1 on page 18.