setting manual WEB MONITORING TOOL for VRF System UTY-AMGXZ1 Ver. 2.0 caution Please read the LICENSE AGREEMENT in the manual first. PART NO.
LICENSE AGREEMENT for “WEB MONITORING TOOL for VRF SYSTEM” IMPORTANT-READ CAREFULLY This “WEB MONITORING TOOL for VRF SYSTEM” License Agreement (LICENSE AGREEMENT) is a legal agreement between you and Fujitsu General Limited (FGL) for the use of VRF WEB MONITORING TOOL products designated below, which includes computer software and printed materials, and may include online or electronic documentation (SOFTWARE PRODUCT or SOFTWARE).
555 EXPORT RESTRICTIONS You acknowledge that the SOFTWARE PRODUCT is of Japan origin. You agree that neither you nor your customers intend to or will, directly or indirectly, export or transmit the SOFTWARE PRODUCT to any country to which such export or transmission is restricted by any applicable regulation or statute, without the prior written consent, if required, of the authorized governmental entity as may have jurisdiction over such export or transmission.
1. Safety precautions∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2. Outline∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 3.
1. Safety precautions 111Safety precautions •• Before using Web Monitoring Tool, read this “SAFETY PRECAUTIONS” thoroughly to ensure the correct operation. •• This section describes the important safety information to operate Web Monitoring Tool. •• The meanings of “WARNING” and “CAUTION” are explained as follows. WARNING This mark indicates the procedures, which might result in the death of or serious injury to the user or service personnel if improperly performed.
222Outline VRF Side System check • Modem or LAN card (Field Supplied) • Personal Computer (Field Supplied) • Modem or LAN card (Field Supplied) Internet • USB Cable (Comes with U10 USB Network Interface) • Personal Computer (Field Supplied) 2. Outline • Software & protection key for Web Monitoring Tool * (UTY-AMGXZ1) • Transmission Adaptor (U10 USB Network Interface) Remote Side • Internet Explorer Operation, Error information VRF System ** WIBU-KEY of UTY-AMGX can be used.
Software construction The Web Monitoring Tool software consists of the Data acquisition application and Monitor application . 2. Outline The Data acquisition application is a program which is made resident when the Web Monitoring Tool is started, and exchanges data with the VRF System transmission line. It also records the received unit data to a database.
333Installation 3333 Precautions •• This product may be updated without prior notice. Since trouble may occur depending on the purchased system, check with your service personnel for updates. •• This product requires the use of one of the following optional transmission adaptors. Procure them in advance. Name & Shapes Transmission Adaptor (U10 USB Network Interface -TP/FT-10 Channel) Q’ty Remark 1 to 4 Procure the necessary number in accordance with the number of connection systems.
3333 Installation flow 333333 Server WARNING! 3. Installation •• Web Monitoring Tool is tested to install and operate under new Windows environment. When program executional environment of Windows is corrupted or abnormal, or other softwares that interfere with the operation of Web Monitoring Tool is installed or running, Web Monitoring Tool may not install or run properly. It is usually extremely difficult to detect such conditions, if it occurs.
Hardware installation Transmission adaptor installation Software installation Insert WHITE-USB-KEY Microsoft® .NET Framework 3.5 setup (Windows 8.1/ Windows 10) Microsoft® .NET Framework 4.6.1 setup Microsoft® SQL Server® 2014 Express setup Menu screen display 3. Installation WIBU-KEY setup Web Monitoring Tool for VRF System Ver x.
444Software License What is software license? •• The software license means the use acceptance of this product in the agreed-upon License Agreement. •• One software license is provided as “License” stored in WHITE-USB-KEY for each purchased product. WHITE-USB-KEY License Web Monitoring Tool 4. Hard ware installation •• For the “License” stored in WHITE-USB-KEY, it can be used by inserting WHITE-USBKEY directly to a PC or it can be moved to a PC using “License Manager for VRF System”.
555Hardware installation (Server) 5555 Transmission adaptor installation UTY-AMGXZ1 Web Monitoring Tool Network VRF System 1 VRF System 2 USB cable VRF System 3 4. Hard ware installation Transmission Adaptor (U10 USB Network Interface) VRF System 4 The Web Monitoring Tool can connect up to 4 VRF systems. Since 1 transmission adaptor connects to 1 system, up to 4 transmission adaptors are connected. Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
U10 USB Network Interface This transmission adaptor is connected using the USB port of a personal computer. To use this product, turn on the power of the PC and install necessary drivers/software for this product (BEFORE connecting it to any USB port ), following the ***QUICK START*** enclosed with this product. When using multiple transmission adaptors, connect the nth VRF System to the nth transmission adaptor, or attach a label so that the transmission adaptors can be identified.
5555 Turning on the power WARNING! Do not turn on the power until all installation work is completed. Once the wiring has been installed, the power can be turned on. Follow the procedure below for turning on the power. Turn on the power for all connected indoor units. Turn on the power for all connected outdoor units. Connect U10 USB Network Interface 4. Hard ware installation (Driver must be installed following the procedure in “par. 5-1 Transmission adaptor installation” before connecting).
666Software Installation & Removal 6666 Installation Notes Before starting the installation of this product, check each of the followings. ♦♦ Install Adobe® Reader® (Ver. 9.0 or later) prior to the installation. (Adobe® Reader® does not come with this product). ♦♦ If one of the following product is already installed, remove it first. Refer to “par. 6-3 Software Removal” for how to remove these products. • Service Tool for VRF System (UTR-YSTC) Ver. 3.0 or later • Service Tool for VRF System (UTY-ASGX) Ver.
6666 Software Installation Insert the WHITE-USB-KEY for the “Web Monitoring Tool for VRF System Ver. x.x” into the WHITE-USB-KEY drive of the PC you are about to install. Double click the “setup.exe” stored in the root directory of the WHITE-USBKEY drive with the mouse. After that, the following installation menu screen is displayed. To continue installation, click the [Install] button. Note 5.
•• Install Offline (when the PC is not connected to internet) When the PC is not connected to the internet, the installation media of the Windows 8.1 or 10 you are using is required to install .NET Framework 3.5. Please have the media ready before continuing the following steps. If you have the installation DVD of the Windows you are using, select “Install using the installation DVD of the Windows you are using”.
After installation starts, follow the direction on the screen, which will guide you through the installation. Note If Windows is rebooted during the installation, execute the installation again from . When installation program ends, “Windows Restart Confirmation Message” will appear. Complete the remaining setup procedures according to the description in the Setting Manual displayed on the screen first. After all the setup is completed, restart the Windows®.
6666 Software Removal Before executing this procedure, be sure to stop the Web Monitoring Tool program if it is running. Also, make sure that WIBU-KEY is not inserted to the PC. 666666 Windows® 7, 8.1 and 10 Open [Start] [Control Panel] the following programs. [Program and Features] and then remove ** For Windows® 7, 8.1, and 10, [Control panel] → set the view mode to “Large Icons” or “Small Icons”. Select the program to be removed from the list below and click [Uninstall] button.
*1 Select the menu items in order of “start” → “All Programs” or “All apps” → “Microsoft SQL Server 2014” → “SQL Server Configuration Manager”. Select “SQL Server Services”. Right-click “SQL Server (SQLEXPRESS)”. Select “Stop”. 5. Software Installation & Removal When [×] is clicked, “SQL Server Configuration Manager” is completed. Perform the following “par. 6-3-2 Task scheduler deletion”. When updating this tool, this operation is unnecessary. Restart the Windows.
666666 Task scheduler deletion Open the task scheduler screen by sequentially selecting the menu as follows. •• Windows® 7, 8.1, and 10 [Start] Note [Control Panel] When the control panel view mode is Large Icons or Small Icons, select the menus in the following order: [Start] [Control Panel] Delete from the task. 5. Software Installation & Removal ・Select “Task Scheduler Library” from the Task Scheduler left tree and display the task list. •• Select “Web Monitoring Tool for VRF System Vx.
777Setting (Server/Client) 7777 Automatic starting Setting to automatically log in to the Operating System is performed. By performing this setting, the Web Monitoring Tool can be automatically started by only turning on the personal computer power. When you want to start Web Monitoring Tool automatically, when the PC recovers from power failure, perform the following setting: Open the setting screen. The setting screen opening method depends on the Operating System. •• Windows® 7 6.
•• Windows® 8.1 Right click the lower-left of the start screen or desktop screen and open the menu to display the setting screen. •• Windows® 10 Right click the start menu ( ) and open the menu to display the setting screen. The screen shown below is displayed. 6. Setting (Server/Client) Input the following at the Open field. control userpasswords2 22 Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
The screen shown below is displayed. Remove the check mark at “Users must enter a user name and password to use this computer”. When you cannot check the checkbox of “Users must enter a user name and password to use this computer” refer to Troubleshooting T-1. Click [OK] button. The screen shown below is displayed. 6. Setting (Server/Client) Input the user name and password. The user is automatically logged in by the user name/password specified here.
7777 Task Scheduler Setting Change the auto-restart setting of Web Monitoring Tool when logging in to the Windows, as follows. Be sure to perform the settings, else Web Monitoring Tool may shutdown at a certain point after restart. Open the task scheduler screen by sequentially selecting the menu as follows. •• Windows® 7, 8.
Double click the name [Web Monitoring Tool for VRF System Vx.x]. The screen shown below is displayed. Click the [Conditions] tab. 6. Setting (Server/Client) Remove the check for the [Start the task only if the computer is on AC power]. Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
Click the [Settings] tab. Remove the checks of the 2 items below. •• [Stop the task if it runs longer than: ] •• [If the running task does not end when requested , force it to stop] There is no problem when already unchecked. Click the [OK] button. 6. Setting (Server/Client) Restart Windows. 26 Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
7777 Windows screen saver setting in remote operation Before performing remote operation, configure the following setting so that the Windows screen will not be locked. Right-click on the desktop and select “Personalize” (“Personalise” in Windows 8.1) from the menu. Open the Screen Saver Setting screen shown below. •• Windows7, 8.1 Screen Saver •• Windows10 Lock screen Screen Saver Settings screen Screen saver settings Screen Saver Settings screen 6.
7. Troubleshooting 888Troubleshooting When trouble occurred during installation work, refer to this section. This section describes assumed problems and how to solve them. T-1 You cannot check the checkbox of.”Users must enter a user name and password to use this computer” at par. 7-1 Automatic starting. Cause : Checkbox cannot be checked when participating at domain by network setting.
Question Answer When an error, etc. occurs at SQL Server 2014 installation while this application is installed 1. For the identification of reason and the countermeasures, check the contents of log file in the following folder. C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log When OS is 64 bit, the folder is C:\Program Files(x86)\Microsoft SQL Server\100\Setup Bootstrap\Log. The following error message is displayed during installation of this tool and installation is not complete.
Trademarks •• Echelon®, LON®, LONWORKS®, LONMARK®, LonBuilder®, NodeBuilder®, LonManager®, LonTalk®, LonUsers®, LonPoint®, Digital Home®, Neuron®, 3120®, 3150®, LNS®, i.LON®, LONWORLD®, ShortStack®, Panoramix®, LonMaker®, the Echelon logo, and the LonUsers logo are trademarks of Echelon Corporation registered in the United States and other countries. •• Microsoft®, Windows® are a registered trademark of Microsoft® Corporation in the United States and other countries.
