Service Manual

06-11
Remove the Compressor cover (Top).
Remove the Terminal Cover.
Remove the Discharge temp. thermistor
and Compressor shell temp. thermistor.
Remove the 3 mounting screws of Terminal.
Remove the Crank Case Heaters.
Comp.cover
(Top)
Color: White&
Green
Discharge temp. thermistor
(TH1)
Crank Case Heater
(2 places)
Hook (2 places)
Compressor shell temp. thermistor
(TH11)
Comp. cover
(Outside)
Color: Green
Comp. cover
(Accumulator)
Color: white
Note :
Compressor cover (Top) consists of 2 parts.
The inside of the Comp.cover is white, and
the outside of Comp.cover is green.
Remove the Compressor cover (Outside),
Compressor cover (Accumulator), and
Compressor cover (Body).
Comp. cover
(Body)
Color: White
Note the tightening torque at the installation.
Tightening torque is 2.0 ~2.5N m.
Note the tightening torque at the installation.
Crank Case Heater should not overlap each other.
Remove the Comp Bolts.
(4 places)
[U: Red, V: White, W: Black]
V(White)
U(Red)
W(Black)