User's Manual

- Server List
Click the Server List button on the top left hand side of the page to display a list of information on servers included in an L-Platform.
The following shows an example of all servers being displayed. To display inactive servers, click the Stopped tab.
The following information can be checked on the Server List page.
- Status: Server status (Running, Stopped)
- Type: Server type
- Server name: Server name
- Host name: The server host name. However, this is not displayed for a physical server
- L-Platform name: The L-Platform name set during L-Platform subscription
- IP address: IP address of the server
- Backup/Snapshot: Status of taking and restoring the backup and snapshots
- Generation: Number of snapshots or backup stored
- Number of snapshots: Number of snapshots or number of executed backups
The sequence of the servers displayed can be switched between ascending order and descending order by clicking the column headers
(status, type, etc).
Point
The following buttons can be used to operate on the Server List page.
- ON button: Start the server
Refer to "4.3.4 Start and Stop the Server" for information on starting the server.
- OFF button: Stop the server
Refer to "4.3.4 Start and Stop the Server" for information on stopping the server.
- Details button: Display details on an L-Platform or a disk.
Refer to "4.3.2 L-Platform Detailed Information Display" for information on displaying L-Platform details. Refer to "4.3.3 Display
Details on a Disk" for information on displaying details on a disk.
- Snapshot button: Take and restore snapshots Refer to "4.3.6 Take and Restore Snapshot" for information on taking and restoring
snapshots.
- 43 -