User's Manual

After an L-Platform is deployed, check the IP addresses of the servers included in the L-Platform and the port numbers used by the installed
middleware. Then, set the allowed IP addresses and port numbers in the relevant rule set parameters in the firewall settings.
4.3.9 L-Platform Reconfiguration
The system configuration that configures the L-Platform in use can be modified on the Reconfigure page.
Note
- The Reconfigure page can be used only if the Infrastructure Administrator is permitted to change the L-Platform Template.
- Before changing the L-Platform, stop the server. If the virtual server is running when you try to change it, an error will occur. However,
the following operations are executable even if the virtual server is running.
- Change the system name
- Change the server name
- Change the disk name
- Add a server
- Add a disk
- Change CPU performance (*) (virtual servers only)
*: This operation can only be executed with RHEL5-Xen.
- Setting the startup priority level
- Regardless of whether or not an L-Platform reconfiguration completion notification email is received, check with the Infrastructure
Administrator if an L-Platform Template is not changed. In this case, the change processing may have failed at the virtual server.
Follow the steps below to modify the system configuration that configures the L-Platform in use:
1. Display the L-Platform Details page.
Refer to "4.3.2 L-Platform Detailed Information Display" for information on how to display the page.
2. Click the Reconfigure button and display the Reconfigure page.
3. Modify the system configuration as required on the Reconfigure page.
Estimated charges corresponding to the system reconfiguration will be displayed in the top-right of the window.
- 54 -