User's Manual

No
A static client IP address, subnet mask, and gateway IP
address must be specified.
Name
Name of the iSCSI initiator to be used (in the case of an iSCSI boot)
for the connection to the iSCSI target.
VLANId
optional
VLAN ID that is used by the HBA to send its requests. It should be
specified only for CNA-iSCSI-functions.
IPv4Address
Only when DHCPUsage is No
The static client IP address to be used for this port. The port will use
this IP address for the entire iSCSI session.
SubnetMask
Only when DHCPUsage is No
The IP subnet mask. This should be the IP subnet mask of the net-
work used to connect this port (in the case of an iSCSI boot).
GatewayIPv4Address
Only when DHCPUsage is No
The IP address of the network gateway. This is necessary if the
iSCSI target is in a subnetwork other than the subnetwork of the
selected iSCSI boot port. If no gateway is used, 0.0.0.0 can be spec-
ified as IP address of gateway.
ISCSITarget
Specifies the values of the iSCSI target. This element contains the fol-
lowing elements:
ServerView Virtual-IO Manager 325
12.3 Format of export files