® System Configuration and Order-information Guide ECONEL 100 S2 March 2009
PRIMERGY ECONEL 100 S2 Front View DVD-ROM Drive 5 inch Bay Floppy Disk Drive Back View Mouse Keyboard Serial Port Display 10/100/1000BASE-T Connector Inside View Power Supply Hard Disk Bay DIMM Slot CPU PCI Slot front side
PRIMERGY ECONEL 100 S2 Instruction This document contains basic product and configuration information that will enable you to configure your system. Only these tools will ensure a fast and proper configuration of your PRIMERGY server. You can configure your individual PRIMERGY server in order to meet your specific requirements. Please follow the lines. If there is a junction, you can choose which way or component you would like to take.
PRIMERGY ECONEL 100 S2 Data Sheet Type Mono-Processor Tower Server Model Base Unit CPU 3.5inch SATA model Pentium® E2200(2.20GHz) PGUE1026B Celeron® 430(1.80GHz) PGUE1021B2 TM Frequencies Intel® Xeon® E3120(3.16GHz) *5 / E3110(3GHz) *6 / Intel® Core 2 Duo E7300(2.66GHz) *7 / Intel® Pentium® E2200(2.20GHz) / Intel® Celeron® 430(1.80GHz) Second-Level-Cache 6MB (Intel® Xeon® E3120(3.16GHz) / E3110(3GHz)) / 3MB (Intel® Core Number of processors Number of cores TM 2 Duo E7300(2.
PRIMERGY ECONEL 100 S2 Configuration Diagram 5 inch Bay 2 DVD-ROM Drive Power Supply Unit Memory < 3.5inch SATA model > Hard Disk 3.5inch Bay Standard Drive Cage( HDD x 4ports ) 5 inch Bay 1 DIMM Slot 2B DIMM Slot 1B 3.5 inch FDD Bay 1 SATA 3.5 inch HDD Bay 4 Bay 2 SATA DIMM Slot 2A DIMM Slot 1A CPU Xeon® E3120 / E3110 / 3.5 inch HDD Bay 3 TM Core 2 Duo E7300 / Pentium® E2200 / Celeron® 430 Bay 3 SATA 3.5 inch HDD Bay 2 3.
PRIMERGY ECONEL 100 S2 Memory Max: 8GB (2GB DIMM x 4) Memory Module-1GB (1GB DIMM x 1) Standard Memory Module: 1GB (1GB DIMM x 1) PGBRM1BH (for CTO) PG-RM1BH Memory Slot * Only one Memory Module can be ordered by CTO. Memory Module-2GB (2GB DIMM x 1) PG-RM2BH PGBRM2BH (for CTO) Memory Module Conversion kit (for CTO) Memory Module Conversion kit-2GB (2GB DIMM x 1) Memory Slot PGBRU2BH2 (for CTO) *. Notes on installing memory 1. Memory is installed by one or more DIMMs. 2.
PRIMERGY ECONEL 100 S2 Internal backup device (USB) Tape Drv DAT72 36GB internal USB Interface PG-DT5043 (internal) PGBDT5043 (for CTO) *. One internal backup device can be mounted. USB Cable PG-CBLU005 PGBCBLU005 (for CTO) Internal Data Cartridge Drive Unit PG-RD1021 PGBRD1021 (for CTO) *. One internal backup device can be mounted. *. If you would like to purchase data cartridges, please refer to the following web site. http://www.tandbergdata.com/sales-apac.