Datasheet

PRIMERGY ECONEL 100 S2
Configuration Diagram
*Components installed as standard configuration marked in grey.
Mountable I/O Options
[ 3.5inch SATA model ]
* [n] : Installation Priority
* - : cannot be installed
Notes on SATA HDD
1. ECONEL 100 S2 (3.5inch SATA model) can be used on a small scale without frequent data access about eight hours a day, for five years.
2. If you would like to use server 24 hours a day, every day, or for database with frequent data access, or for mission-critical tasks which require high reliability,
please purchase another SAS model.
3. Please backup data on a regular basis to prevent loss of data.
4. Dump function of Linux is not available for ECONEL 100 S2 (3.5inch SATA model). If you would like to use dump function of Linux, please purchase another SAS model.
Connection Table
*CPU Conversion kit (available only as a Configure To Order (CTO) option; no separate shipment is possible)
CPU Conversion kit: Intel® Pentium® E2200(2.20GHz/1MB) -> Intel® Xeon® E3120(3.16GHz/6MB)
Pentium E2200(2.20GHz) Convert the CPU installed as standard in the base unit to the other.
-> Xeon E3120(3.16GHz) (Note: This option can be ordered only as coupled with the base unit.
(for CTO) A separate shipment is not possible.)
CPU Conversion kit: Intel® Pentium® E2200(2.20GHz/1MB) -> Intel® Xeon® E3110(3GHz/6MB)
Pentium E2200(2.20GHz) Convert the CPU installed as standard in the base unit to the other.
-> Xeon E3110(3GHz) (Note: This option can be ordered only as coupled with the base unit.
(for CTO) A separate shipment is not possible.)
CPU Conversion kit: Intel® Pentium® E2200(2.20GHz/1MB) -> Intel® Core
TM
2 Duo E7300(2.66GHz/3MB)
Pentium E2200(2.20GHz) Convert the CPU installed as standard in the base unit to the other.
-> Core 2 Duo E7300(2.66GHz) (Note: This option can be ordered only as coupled with the base unit.
(for CTO) A separate shipment is not possible.)
1
-
Parallel Port - - - - [1]
-
Internal array
No AFT/ALB Support
1
1
[1]
[1] -PG-285 PCI Express (x1)
PG-248BC
[1] - -
33MHz
Type
-
PG-PP08
Eth. Ctrl 1x1Gbit PCI-E
1000-BASE-T
SAS RAID Ctrl w/ Cable
( 8ports / 256MB / without BBU )
lane
Eth. Ctrl 1x1Gbit PCI
1000-BASE-T
PG-1853 PCI/32bit
-
Mount Priority Mountable Cards Bus
x1
lane
1 2
PCI Express (x4) -
Max No.of Mount Remarks
x4 x8
lane
PCI Slot
Full Height
3.3V x8 socket
PCI PCI Express
32bit/
3 4
- 1 No AFT/ALB Support
PGBUFU50P
Product ID
Remarks
PGBFU50K
PGBFU50L
High
Low
Power Supply Unit
CPU
Xeon®
E3120 / E3110 /
Core
TM
2 Duo
E7300 /
Pentium®
E2200 /
Celeron®
430
< 3.5inch SATA model >
Hard Disk 3.5inch Bay
Standard Drive Cage( HDD x 4ports )
Bay 1
SATA
Bay 2
SATA
Bay 3
SATA
Bay 4
SATA
Memory
DIMM Slot 2A
DIMM Slot 1A
DIMM Slot 1B
DIMM Slot 2B
PCI Slots
PCI4 PCI Express (x1)
PCI3 PCI Express (x8)
PCI2 PCI Express (x4)
PCI1 PCI 32bit/33MHz
5 inch Bay 2
DVD-ROM Drive
5 inch Bay 1
3.5 inch FDD
3.5 inch HDD Bay 4
3.5 inch HDD Bay 3
3.5 inch HDD Bay 2
3.5 inch HDD Bay 1