User Manual
Table Of Contents
- FUJITSU LIFEBOOK E4411 | FUJITSU LIFEBOOK E4511
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Switching off the notebook
- Keyboard
- Touchpad and touchpad buttons
- LCD screen
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless€LAN / Bluetooth / LTE
- Ethernet and LAN
- Your USB Thunderbolt™ Port replicator (optional)
- Ports on the Thunderbolt™ Port Replicator
- Charge level indicator on the Thunderbolt™ Port Replicator
- Setting up the port replicator
- Connecting the power adapter to the Thunderbolt™ Port Replicator
- Connecting the notebook to the Thunderbolt™ Port Replicator
- Switching on the notebook via the Thunderbolt™ port replicator
- Disconnecting the notebook from the Thunderbolt™ Port Replicator
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Recovering memory module content from the Recovery DVD
- Restoring the system under Windows
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Working w ith the notebook
Removing and installing the battery
Only use batteries approved by Fujitsu for your notebook.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never s tore a battery for long periods in the discharged state. This
can m ake it impossible to recharge.
The LIFEBOOK E4511 is shown below. The procedure is identical for both device variants.
Removing a battery
► Prepare for removal, see c hapte r "Preparin g to remove components", Page 64 .
1 HOLD
3 PULL UP
3
a
1
2
► Slide the l
ocking device (1) in the d ire ction of the arrow and hold it in place.
► Slide the locking device (2) in t he d irection of the arrow.
► Grasp the
opening (b) and lift the ba ttery out of the battery compartment
in the di
rection of the arrow (3).
Fujitsu 37