User Manual
Table Of Contents
- FUJITSU LIFEBOOK E4411 | FUJITSU LIFEBOOK E4511
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Switching off the notebook
- Keyboard
- Touchpad and touchpad buttons
- LCD screen
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless€LAN / Bluetooth / LTE
- Ethernet and LAN
- Your USB Thunderbolt™ Port replicator (optional)
- Ports on the Thunderbolt™ Port Replicator
- Charge level indicator on the Thunderbolt™ Port Replicator
- Setting up the port replicator
- Connecting the power adapter to the Thunderbolt™ Port Replicator
- Connecting the notebook to the Thunderbolt™ Port Replicator
- Switching on the notebook via the Thunderbolt™ port replicator
- Disconnecting the notebook from the Thunderbolt™ Port Replicator
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Recovering memory module content from the Recovery DVD
- Restoring the system under Windows
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Working w ith the notebook
Memory cards
Slot
Your notebook is equipped with an integrated memory card reader.
Observe the manufacturer’s instructions when handling the memory cards.
Memorycard
Supported formats
Your notebook supports the following forma t:
• Secure Digital (SD
TM
card)
Inserting the memory card
► Carefully push the memory card into the
slot until you feel it click into place. The
label area must be facing upward. Do not
apply any force, otherwise the delicate
contact surfaces could be damaged.
Memorycard
Depending on the particular type
used, the mem ory card may protrude
slightly from the slot.
Removing the memory card
Memorycard
In order to protect your data, always follow the correct procedure for removing
the card (see the documentation for you r operating system).
1
2
► On devices with card locking: Press
on the memory card (1).
Memorycard
The memory card is released and
can now be removed.
► Pull the memory card out of the slot (2).
Fujitsu 41