User Manual
Table Of Contents
- FUJITSU LIFEBOOK E4411 | FUJITSU LIFEBOOK E4511
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Switching off the notebook
- Keyboard
- Touchpad and touchpad buttons
- LCD screen
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless€LAN / Bluetooth / LTE
- Ethernet and LAN
- Your USB Thunderbolt™ Port replicator (optional)
- Ports on the Thunderbolt™ Port Replicator
- Charge level indicator on the Thunderbolt™ Port Replicator
- Setting up the port replicator
- Connecting the power adapter to the Thunderbolt™ Port Replicator
- Connecting the notebook to the Thunderbolt™ Port Replicator
- Switching on the notebook via the Thunderbolt™ port replicator
- Disconnecting the notebook from the Thunderbolt™ Port Replicator
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Recovering memory module content from the Recovery DVD
- Restoring the system under Windows
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Settings in BIOS Setup Utility
Erase Disk
Erase Disk is a solution that is integrate d into the firmware o f the F UJITSU Computer
(UEFI: Unified Extensible Firmware Interface), to delete all the data from a hard
disk or a solid state drive (SSD) memory module.
This function can be used to permanently delete all data from hard disks or SSD memory
modules, before they are discarded or the complete computer system is disposed of.
The function can also be used if hard disks/SSD memory modules must be com pletely
deleted, e.g. before installing a new operating system.
The application can only be selected and run if an administrator/supervisor
password has been assigned (Menu BIOS Setup - Security).
Proceed as follows to d
elete data from hard disks/SSD memory modules:
► Call the BIOS Setup wi
th the Administrator/Supervisor p assword.
► To start the application, select Erase Disk (BIOS Setup - Advanced or BIOS
Setup - Security )andsetStart after Reboot.
► Then select Save Ch
anges and Exit in the menu Save & Exit / Exit to initiate
a reboot and start E
rase Disk.
Because of the reb
oot, the Erase Disk will be started. You have the option
to interrupt the
process during the user selection.
► After the application starts, the A dministrator/Supervisor password must
be entered for security reasons.
A dialogue field appears in which a particular, several or all the hard disks/memory
modules can be selected for deletion. This depends on the number of hard
disks/SSD storage modu les in your system.
► Select the hard disk(s)/SSD memory modules to be deleted. The selected hard
disk(s)/SSD memory modules will be deleted one-by-one.
Erase Disk offers f our deletion options, from fast (with one deletion pass) to very
secure (with 35 deletion passes). Depending on the algorithm chosen, the process
can take between ~10 seconds and ~10 minutes per GB:
• Zero Pattern (1 pass)
• German B SI /VS ITR (7 passes)
• DoD 5220.22-M ECE (7 passes)
• Guttmann (35 p asses)
SSD dri
ves are securely erased with the Enhanced Secure Erase ATA
comma
nd integrated in the firmware.
► Select the desired deletion algorithm for the selected hard disks/SSD memory modules.
Fujitsu 73