User Manual
Table Of Contents
- FUJITSU LIFEBOOK E4411 | FUJITSU LIFEBOOK E4511
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Switching off the notebook
- Keyboard
- Touchpad and touchpad buttons
- LCD screen
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless€LAN / Bluetooth / LTE
- Ethernet and LAN
- Your USB Thunderbolt™ Port replicator (optional)
- Ports on the Thunderbolt™ Port Replicator
- Charge level indicator on the Thunderbolt™ Port Replicator
- Setting up the port replicator
- Connecting the power adapter to the Thunderbolt™ Port Replicator
- Connecting the notebook to the Thunderbolt™ Port Replicator
- Switching on the notebook via the Thunderbolt™ port replicator
- Disconnecting the notebook from the Thunderbolt™ Port Replicator
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Recovering memory module content from the Recovery DVD
- Restoring the system under Windows
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Tro ubleshooting and tips
When certain c haracters are ent
ered o n the
keyboard, only numerals are written
Cause Troubleshooting
The virtual numeric keypad of y
our device is
activated, see "
Virtual nume
ric keypad", Page 28
► Press the
Num
key.
The notebook’s LCD screen remains blank
LCDscreenLCDscreenistoodark
Cause Troubleshooting
Monitor is switched o ff.
► Press a key or touch the touchpad.
External monitor or te levision set connected. ► Press the key to switch scre en output, see
"
Functio n keys and key combinations",
Page 29.
The LCD screen is dif
ficult to read
LCDscreenLCDscreen
Cause Troubleshooting
Reflected glare ► Turn the notebook or alter the tilt of the LCD
screen.
► Increase the brightness of the screen.
The external monitor remains blank
Monitor
Cause Troubleshooting
Monitor is swi
tched off.
► Switch the e xt
ernal mon itor on.
Power saving has been activated (monitor is
blank).
► Press any key
to continue.
Brightness is set to dark.
► Adjust the brightness of the monitor.
Screen out
put is set to the notebook’s LCD
screen
► Press the key to switch scre en output, see
"
Functio n keys and key combinations",
Page 29.
The external monitor’s power cable or data
cable is n ot connected properly.
► Switch of
f the external monitor and the
noteboo
k.
► Check whether the power cable is plugged
properly into the external monitor and into
the power socket.
► Check w
hether the data cable is properly
conne
cted to the notebook and the external
monit
or (if it is plugged in with a connector).
► Switch on the external monitor and the
notebook.
Fujitsu 77