Datasheet
Data Sheet FUJITSU Server PRIMERGY RX2530 M1 Dual socket 1U rack server
Page 4 / 11 www.fujitsu.com/fts
Memory protection Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Rank sparing memory support
Memory Mirroring support
Memory notes Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or
Performance Mode with identical modules in all four channels (4 modules per bank).
Memory options 8 GB (1 module(s) 8 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 1Rx4
8 GB (1 module(s) 8 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx8
16 GB (1 module(s) 16 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx4
32 GB (1 module(s) 32 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133P, LRDIMM, 4Rx4
32 GB (1 module(s) 32 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx4
Memory modules notes 1536 GB memory expected to be available Q2/2015, current max. memory capacity 768 GB
Interfaces
USB 2.0 ports 1 x USB 2.0 (1x rear)
USB 3.0 ports 5 x USB 3.0 (2x front, 2x rear, 1x internal) - for base unit with 10x 2.5” drives 1x USB2.0 at front only
Graphics (15-pin) 2 x VGA (thereof 1x front optional - not for base unit with 10x 2.5” drives)
Serial 1 (9-pin) 1 x optional (occupies PCIe slot)
Management LAN (RJ45) 1 x dedicated management LAN port for iRMC S4 (10/100/1000 Mbit/s)
Management LAN trafc can be switched to shared onboard LAN port
Onboard or integrated Controller
RAID controller additional RAID controller options are described under Components RAID controller
SATA Controller Intel® C612, 1 x SATA channel for ODD
LAN Controller DynamicLoM based on Emulex XE100 series. 2x 1Gbit/s Dynamic LoM#4x 1Gbit/s Dynamic LoM#2x 10Gbit/s 10GBASE-T
Dynamic LoM#2x 10Gbit/s SFP+ Dynamic LoM. All supported features are described in relevant system congurator.
PXE-Boot via LAN from PXE server, iSCSI / FCoE boot (also diskless).
Extra LAN controller(PCIe Cards) are listed below. (i210 LAN card via project release possible)
Remote management controller Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Onboard controller notes Onboard 8x S-ATA 6Gbit/s RAID Controller (RAID 0,1) for up to 8x S-ATA drives available. (up to 4x 3.5” HDD @ launch, up
to 8x 2.5” HDD later)
Trusted Platform Module (TPM) Inneon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 3.0 x8 2 x Low prole
PCI-Express 3.0 x16 2 x Low prole (2nd processor required for slot 4); 1x16 if fh slot selected
Slot Notes Slot 1 (internal): PCIe Gen3 x8 @CPU1 is dedicated for the modular RAID Controller.
Slot 2: PCIe Gen3 x8 @CPU1 for low prole cards with up to 167mm length
Slot 3: PCIe Gen3 x16 @CPU1 for low prole cards with up to 167mm length
Slot 4 standard: PCIe Gen3 x16 @CPU2 for low prole cards with up to 167mm length
Slot 4 option: PCIe Gen3 x16 @CPU2 for full height cards with up to 167mm length (!in this case, slot 3 is not available)
Drive bays (Base unit specic)
Storage drive bays up to 8 x 2.5-inch, 10 x 2.5-inch or 4 x 3.5-inch baseunit
Accessible drive bays 1 x 5.25/0.4-inch for CD-RW/DVD
Notes accessible drives Not for 10 x 2.5-inch base unit. All possible options described in relevant system congurator.
Drive bays (Base unit specic)
Storage drive bays up to 4x 3.5” (LFF) hot plug drives
(SAS/SATA)
up to 4x 2.5” (SFF) hot plug drives (SAS/
SATA); option for upgrade to 8x 2.5”
(SFF) hot plug drives
up to 10x 2.5” (SFF) hot plug drives
(SAS/SATA); therein up to 4x bays are
prepared for 2.5” PCIe Flash SSD.
Optional accessible drives Ultra slim 9.5mm optical drive
(optional)
Ultra slim 9.5mm optical drive
(optional)
-o-
General system information
Number of fans 8
Fan conguration redundant / hot-plug
Fan notes 3+1 double-fans for 1 CPU conguration; 7+1 double-fans for 2 CPU conguration