Datasheet

Data Sheet FUJITSU Server PRIMERGY RX2540 M1 Dual socket 2U rack server
Page 4 / 10 www.fujitsu.com/fts
Memory protection Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Rank sparing memory support
Memory Mirroring support
Memory notes Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or
Performance Mode with identical modules in all four channels (4 modules per bank).
Memory options 8 GB (1 module(s) 8 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 1Rx4
8 GB (1 module(s) 8 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx8
16 GB (1 module(s) 16 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx4
32 GB (1 module(s) 32 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133P, LRDIMM, 4Rx4
Interfaces
USB 2.0 ports 5 x USB 2.0 (2x rear, 1x front external, 1x USB stick, 1x uSSD)
USB 3.0 ports 5 x USB 3.0 (2x front, 2x rear, 1x internal for backup device)
Graphics (15-pin) 2 x VGA (thereof 1x front optional)
Serial 1 (9-pin) 1 x serial RS-232-C optional, usable for iRMC or system or shared
Management LAN (RJ45) 1 x dedicated management LAN port for iRMC S4 (10/100/1000 Mbit/s)
Management LAN trafc can be switched to shared onboard LAN port
Onboard or integrated Controller
RAID controller additional RAID controller options are described under Components RAID controller
SATA Controller Intel® C612, 1 x SATA channel for ODD
LAN Controller DynamicLoM based on Emulex XE100 series. All supported features are described in relevant system congurator.
PXE-Boot via LAN from PXE server, iSCSI / FCoE boot (also diskless).
Remote management controller Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Trusted Platform Module (TPM) Inneon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 3.0 x8 3 x Low prole (2nd processor required for slot 4)
PCI-Express 3.0 x16 3 x Low prole (2nd processor required for slot 5 and 6)
Slot Notes First PCIe Gen3 x8 slot may be occupied with a Modular RAID controller if congured.
Important: 3 PCIe slots are supported with the rst processor. 6 PCIe slots are supported with two processors.
PCIe riser card options can expand number of slots by two (max. 8 in total) and support max. 4 full height slots.
Possible slot length described in relevant system congurator.
Drive bays
Storage drive bays 3.5-inch or 2.5-inch (avail. 02/2015) hot-plug SAS/SATA
Accessible drive bays 1 x 5.25/0.4-inch for CD-RW/DVD
Notes accessible drives All possible options described in relevant system congurator.
Drive bays (Base unit specic)
Storage drive bays Max 8 x 3.5-inch hot-plug SAS/SATA Max 12 x 3.5-inch
Accessible drive bays 1 x 5.25/0.4-inch for CD-RW/DVD
Optional accessible drives ODD 5.25” possible ODD 5.25” not possible
General system information
Number of fans 5
Fan conguration redundant / hot-plug
Fan notes 4+1 redundant
Operating panel
Operating buttons On/off switch
Reset button
NMI button
ID button