PRIMERGY TX100 S3p System configurator and order-information guide May 2012 Contents Instructions Configuration diagram Configurator 0 System software I Basic unit II Processor III Memory IV Graphics V Accessible drives VI RAID Controller VII Hard disk drives VIII Communikation/Network IX Miscellaneous X Country specific power cords Change report PRIMERGY Server
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/ System-Architect. Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to adjust your specific requirements.
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 Configuration diagram PRIMERGY TX100 S3p SIDE VIEW FRONT VIEW System unit ( I ) Channel B Standard DIMM 2 - B Power supply DIMM 1 - B Intel CPU Channel A Dual or Quad Core DIMM 2 - A 5.25" x 1.6" CD / DVD drive DIMM 1 - A 5.25"x1.6" Memory ( III ) Processor ( II ) 3.5"x1" not used 3.5"x1" not used Slot Number Extension slots Disk Array ( VIII ) Communication/Network ( IX ) Accessible drives (V) 4.
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 Start PRIMERGY TX100 S3p Software Configurator 32 bit with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately.
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 Start PRIMERGY TX100 S3p Software Configurator 64 bit with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately.
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 Start PRIMERGY TX100 S3p I Section Basic unit System unit consisting of: * Housing including standard power supply (no redundancy) * Imprint of MAC Adress on system label and delivery note as standard * heat sink for CPU Systemboard with: * 4 PCI expansion slots: 1x PCIe x1, mechanically x4, notched (possible to plug x16 cards) 1x PCIe x4, notched; fits for lp (low profile) and fh (full high) formfactor cards 2x PCIe x
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 A S26361-K1410-V103 SATA basic unit Floorstand without CPU and Memory - one CPU / 1 to 4 Memory module(s) has to be selected via CPU / Memory order codes standard PSU S26361-K1410-V203 SATA basic unit Floorstand without CPU and Memory - one CPU / 1 to 4 Memory module(s) has to be selected via CPU / Memory order codes standard PSU w/ 0-Watt function S26361-F3301-E6 for K1410-V103 S26361-F3301-E5 for K1410-V203 Energy Sta
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 B II Section Processor One of following CPU´s has to be selected for an orderable basic unit Dual-Core CPU`s - 1x 64-bit Intel Celeron (2MB SLC), Pentium (3MB SLC) or Core-i3 (3MB TLC) occupies socket for one CPU Celeron Celeron G550 2.60GHz 2MB 2C/2T 1066MHz (65W) S26361-F3579-E255 on special release Pentium Pentium G640 2.80GHz 3MB 2C/2T 1066MHz (65W) S26361-F3579-E264 Core i3 Core i3-3220 3.
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 C V Section Accessible drives There are 2 drive bays (2x 5,25") for accessible drives. as soon as available S26361-F3266-E2 DVD-ROM 16/48x SATA incl. description (Ger/US) 1.6 x 5.25", black bezel max. 1x per system S26361-F3324-E4 Tape drive DDS Gen5 USB 5.25" 36GB, 3MB/s, USB 2.0 Connector: USB "B" with USB cable incl. description (Ger/US) data and cleaning cartridge 1.6 * 5.25", black bezel max.
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 D VI Section RAID-Controller TX100 S3p does not support SAS HDD: - for use with SATA HDD only S26361-F3554-E512 8 port SAS RAID Controller LSI MegaRAID SAS 2108 512MB Cache with ECC SAS 6Gb/sec 8 internal ports PCIe x8, 168mm with combi bracket max.
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 E VIII Section Communication / Network S26361-F3610-E2 Gigabit Ethernet Controller Dual 1000TX Eth Ctrl 2x1Gbit PCIe x4 D2735 Cu Intel Kawela based 2 port Server Adapter PCIe x4, ext: for RJ45-plug, Cat 5 max.
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 F Section IX Miscellaneous Section X Country specific power cords, Keyboard, Mouse USB keyboards for following countries: USB standard Keyboard KB400 S26381-K550-E170 S26381-K550-E104 S26381-K550-E120 S26381-K550-E180 S26381-K550-E140 S26381-K550-E165 S26381-K550-E185 S26381-K550-E154 S26381-K550-E102 Switzerland Czech/Slovak Germany Germany / Int Spain France United Kingdom Italy Sweden / Finland USA / internationa
System configurator and order-information guide PRIMERGY TX100 S3p Status 2012-04-30 Change Report Date Order number Changes 2012-04-27 2012-04-02 2012-03-30 S26361-F3579-E264 Removed Core Edition Variants Added new Pentium and Celeron CPU First Release Fujitsu Technology Systems x86 PRIMERGY Server 13 of 13
