Datasheet

System configurator and order-information guide
D
PRIMERGY TX100 S3p Status 2012-04-30
Section
VI
RAID-Controller
TX100 S3p does not support SAS HDD:
- for use with SATA HDD only
S26361-F3554-E512 S26361-F3669-E1
8 port SAS RAID Controller RAID Ctrl SAS 6G 8port internal
LSI For later upgrade to RAID Based on chip LSISAS2208
MegaRAID SAS 2108
you need to order
LSI MegaRAID
512MB Cache with ECC S26361-F3554-L512 1GB Cache with ECC
SAS 6Gb/sec with the additional RAID 0, 1, 10, 5, 50, 6, 60
The FBU is an option
8 internal ports RAID cable TX100 S3p
optional FBU
for the controller
PCIe x8, 168mm
S26361-F3659-L2
Support for 3Gb/s and 6Gb/s which can be used
with combi bracket SATA and SAS hard drives
once per controller.
max. 1x per system
PCIe x8 If the FBU option
Low-profile MD2 form factor
has been choosen, the
max. 1x per system
TFM Module is
S26361-F3257-E255
L-Order-Number is:
needed once per FBU.
Cache Battery Backup Unit
S26361-F3257-L210
For loose delivery of
max. 1x per Controller
S26361-F3669-E100
TFM & FBU please order:
TFM Module for FBU option
S26361-F3669-L100
max. 1x per Controller
TFM Module for FBU
and
S26361-F3669-E125
S26361-F3669-L110
Flash Backup Unit
Flash Backup Unit
with 25cm cable set
with 25cm, 55cm,
max. 1x per Controller
70cm cable set
Section
VII
Hard disk drives
There is a 6 port SATA controller in the Base Unit.
Up to 4 SATA LFF (3.5") hard disks can be configured.
ECO SATA 6Gb/s HD 3.5" non hot plug
250GB 7.200rpm,<9,0ms, 8MB Cache S26361-F3701-E250
500GB 7.200rpm,<9,0ms, 8MB Cache S26361-F3701-E500
Choose up to 4 order codes above.
4x
Business Critical (BC) SATA 6Gb/s HD 3.5" non hot plug
500GB 7.200rpm,<9,0ms, 8MB Cache S26361-F3671-E500
1000GB 7.200rpm,<9,0ms, 8MB Cache S26361-F3671-E100
2000GB 7.200rpm,<9,0ms, 8MB Cache S26361-F3671-E200
3000GB 7.200rpm,<9,0ms, 8MB Cache S26361-F3671-E300
as soon as available
Choose up to 4 order codes above.
E
Fujitsu Technology Solutions x86 PRIMERGY Server 10 of 13