Datasheet
Data Sheet Fujitsu PRIMERGY TX200 S7 Server
Page 4 / 10 www.fujitsu.com/fts
Interfaces
Status LEDs System status (orange / yellow)
Identication (blue)
Hard disks access (green)
Power (amber / green)
CPU status
Fan status
Hard disk error
Temperature
CSS (yellow)
Memory status
PSU status (green/ amber)
At system rear side:
System status (orange / yellow)
Identication (blue)
LAN connection (green)
LAN speed (green / yellow)
Onboard or integrated Controller
RAID controller additional RAID controller options are described under Components RAID controller
SATA Controller Intel® C602, 6-port SATA (4x for internal hard disks, 2x for accessible drives)
SATA controller type notes On board SATA controller supports RAID levels 0, 1, 10
Remote Management Controller Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller), IPMI 2.0
compatible
Trusted Platform Module (TPM) Inneon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 3.0 x4 (mech. x8) 2 x Full height 280 mm max. length
PCI-Express 3.0 x16 2 x Full height 280 mm max. length; second x16 slot only with 2 CPUs available 170 mm length
PCI-Express 2.0 x4 (mech. x8) 1 x Full height 230 mm max length; preferred RAID slot
PCI-slots 1 x PCI 32/33 MHz, 1x long, 5V
Slot Notes in SAS conguration 1x PCI-Express occupied by modular RAID controller
Drive bays
Storage drive bays 3.5-inch or 2.5-inch hot-plug SAS/SATA
Notes accessible drives All possible options described in relevant system congurator.
Storage drive bays Max 8 (4 + 4) x 3.5-inch Max 16 (8 + 8) x 2.5-inch
Accessible drive bays 3 x 5.25/1.6-inch for 4 x 3.5-inch HDD/SSD, or 2 x 3.5-inch
HDD/SSD + 1 x LTO + 1 x LSD
1 x 5.25/0.5-inch for slimline ODD
3 x 5.25/1.6-inch for 8 x 2.5-inch HDD/SSD + LTO/ODD, or
8 x 2.5-inch HDD/SSD + slim DVD + LSD
Fan Conguration
Number of fans 4
Fan conguration 3 + 1 redundant
Fan notes redundant fan conguration depends on base unit and is only available in combination with redundant PSU
Operating panel
Operating buttons On/off switch
NMI button
Reset button