Technical data

Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the informat
ion provided in the "Safety/regulations" manual
and in the following safe
ty notes.
When installing and ope
rating the device, please observe the notes on
environmental conditi
ons in Chapter "
Technical data", Page 57 as well as
the instructions in Cha
pter "
Getting s tarted", P age 13.
When setting up the dev
ice, make sure there is clearance all around it so that
thecasingreceives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on are as of the mon itor or the device.
You must only opera
te the device if the rated voltage used by the
device is set to the
local mains voltage.
You must remove the
power plug from the pow er socket so that the
mains voltage is c
ompletely disconnected.
Operate the devic
e only with the casing closed.
Replace the lit
hium battery o n the mainboard in accordance with the instructions
in "
Replac ing t
he lithium battery", Page 56.
Caution, comp
onents in the system can get very hot.
The activitie
s described in these instructions must always be
performed wi
th the greatest care.
Repairs to th
e device must only be performed by qualified technicians.
Incorrect re
pairs could put the user at great risk or cause serious dam age
to the equ ip
ment (electric shock, risk of fire).
Transport
ing the device
Device,Tr anspo r
tation
Retransp
ortation
Transport all parts separa tely in their original packaging or in a packaging which
protects them from knocks and jolts, t o the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be
used, condensation may occur. To avoid dam aging the device, wait until it has
reached room temperature and is abso lutely dry before initial startup.
Fujitsu 9