Technical data

Getting started
If an additional display adapter other than the C PU display adapter is
plugged into the system, only one additional monitor is provided for display
on the onboard display adapter. The two others act as ServicePorts and
are not intended for simultaneous image playb ack.
The DisplayPort is the preferred port. Therefore, the cover here can be broken off with
the help of a predetermined brea king point, in order to make the po rt accessible. If a
DVI or VGA port is required, the display adapter cover must be removed.
Connecting the mouse
You can connect a USB mouse or a PS/2 mouse to your device .
Mouse,Connecting,
Connecting a USB mouse
► Connect the U S B mouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
The PS/2 mouse is only detected by the device if you connect the mouse w h en
the device is s witched off and then switch the device o n again.
► Switch your device
off.
If you do not atta
ch a mouse to the PS/2 mouse port, you can disable the mouse
controller in th
e BIOS Setup in order to free the IRQ12 for a different application.
► Connect the PS/2 mouse to the PS/2 mouse port of the device.
PS/2mouse,Con necting,PS/2mouse,
► Switch your device on again.
18 Fujitsu