Technical data

Troubleshooting and tips

Refer to the safety notes in the "Safety/regulations" manual and in th e "Getting

started", Page 13 chapter when connecting or disconnecting cables.

If a fault oc c u rs, try to c

orrect it as described in the following documentation:

• in this chapter

• in the documentation for the connected devices

• in the help systems of th

esoftwareused

• in the documentation for your operating system

Help if problems occur

Should you e ncount

er a problem with your computer that you cannot resolve yourself:

► Note the ID number

of your device. The ID number is found on the type rating

plate on the back,

the underside or the top of the casing.

► For further clariﬁcation of the problem, contact the Service Desk for your country (see the

Service Desk list or visit the Internet at "

http://support.ts.fujitsu.com/contact/se rvicedesk"). When

you do this, please have ready the identity number and serial number of your system.

Troubleshooting

Power-on indicator remains unlit after you have

switched on y our device

Cause

Troubleshooting

The mains voltage supply is faulty. ► Check wh ether the power cable is plugged

properly into the device and a grounded

mains outlet.

Internal power supply overloaded.

► Pull the power plug of the device o ut of the

mains outlet.

► Wait app

rox. 3 min.

► Plug the power plug into a properly grounded

mains outlet again.

► Switc

h the device on.

30 Fujitsu