Technical data

System expansions
Installing and removing the accessible 5
1
/
4
inch drive
The following chap ter illustrates the standard version and not the power version. However,
the procedure in the following chapters is the same for both versions.
Fitting the drive cover for
the 5
1
/
4
inch drive
To use the latch function of the accessible 5
1
/
4
inch drive, you must fit the correspo ndin g
drive cover before inst alling the drive in the casing. Proceed as follows:
► Open the casing (see "
Opening the casing", Page 36).
1
► Remove the drive cover from the bracket in the direction of the arrow (1).
1
► Connect the drive cover to the drive (1).
38 Fujitsu