Technical data

System expansions
Removing an access ible drive
► Open the casing (see "Opening the casing", Page 36).
1
2
► Disconnect the cables connected to the drive .
► Slide the clip in the direction of the arrow (1).
► Pull the drive out of the casing in the direction of the arrow (2).
1
► Remove the drive cover from the drive (1).
1
► Place the drive cover on the holder in the direction of the arrow (1).
► If nece
ssary, make the required settings on the remaining hard disk drives.
► If you are not installing a new drive, reinstall the previously removed cover (optional) for the
purposes of cooling, fire protection and to prevent foreign objects from getting into the casing.
► Clos
e the casing (see "
Closing the casing" , Page 37).
40 Fujitsu