Technical data

System expansio ns
Installing a hard disk drive
► Open the casing (see "Opening the casing", Page 36).
► Secure the E asyChange rails to the side of the hard disk drive by inserting the upper
pins of the EasyChange rail in the corresponding holes o f the hard d isk.
1
► Slide the hard disk drive with the EasyChange rails into the drive cage in the direction of the arrow
(1). Check that the component side of the hard disk drive faces inwards towards the casing floor.
► Connect the cables to the hard disk drive.
► Close the casing (see "
Closing the casing" , Page 37).
It may be necessary t o modify the entry for the drive in the BIOS Setup.
Fujitsu 49