User Guide

Important notes
Additional safety notes for devices with
wireless componen ts
Wirelesscom ponentsWirelessLANBluetooth,Safetynotes
If a wireless component (W ireless LAN, Bluetooth) is integrated in your Tablet PC, you must be
sure to observe the following safety precautions when using your Tablet PC:
• Switch off the wireless components when you are in an aircraft or driving in a car.
• Switch off the wireless components when you are in a hospital, an operating
room or near a medical electronics system. The transmitted radio waves
can impair the operation of medical devices.
• Switch off the wireless components, when you let the device get near flammable
gases or into hazardou s environment s (e. g. gas statio n, paint stores), as the
transmitted radio waves can cause an explosion or a fire.
For further information on how to switch the wireless components on and off, refer
to section "
Switch ing the wireless components on and off", Page 40.
Protecting the d isplay screen
Do not pour liquid
s on the system or wash it with a heavily soaked cloth. Do not place
items on the top o
f the monitor in order to pre vent it from being damaged.
During normal u
se of the device, small particles from the environment
can become embe
dded in the stylus tip and scratch the screen. The
warranty does
not cover a scratched screen.
Energy savin
g
NotesEnergyPowersavin
g
If you will not be using your Tablet PC, switch it off. Switch off any connected external devices when
they are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you do
this, you will be able to work longer with the Tablet PC before having to recharge the battery.
The energy efficiency is increased and environmental p ollution is reduced.
You save mone y and help protect the environ ment.
Energy saving under Windows
► Make use of the available energy-saving functions as described in chapter
"
Using the ener gy saving functions", Page 38.
14 Fujitsu