User Guide
Table Of Contents
- FUJITSU Tablet STYLISTIC R726
- Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus (optional, configuration dependent)
- Volume rocker
- Camera
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- Wireless LAN/Bluetooth/NFC wireless components (configuration dependent)
- Ethernet and LAN (only with docking cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Using the security lock (docking cradle only)
- Configuring password protection in BIOS Setup Utility
- Trusted Platform Module - TPM (configuration dependent)
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- Recovering your Factory Image
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the stylus movements
- Stylus input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warning
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Declarations of conformity
- FCC Regulatory Information
- Canada, Industry Canada (IC)
- Appendix
- Index
Working with the Tablet PC
Removing the memory card
Memorycard
To avoid any loss of data, always follow the correct procedure for removing the
card (see the documentation for your operating system).
2
a
3
1
► Fold out the tablet stand (1).
► Open the slot cover (2).
► Press the edge of the memo ry card so that the mem ory card jumps slightly out of the slot (a).
► Pull the memory card out of the slot (a) in the direction of the arrow (3 ).
► Close the slot cover again.
Wireless LAN/Bluetooth/NFC wireless components
(configura
tion dependent)
The installation of wireless components not approved by Fujitsu will
invalidate the certifications issued for this device.
Switching the wireless components on and off
The wireless components are switched on an d off using the appropriate
functions of the operating system.
► To switch wireless compo nents on a nd off individually, select Settings – Network & Internet.
40 Fujitsu