User's Manual Part 1
Table Of Contents
- Table of Contents
- Preface
- 1
- 2
- 3
- 4
- 5
- Preface
- 1
- Getting Started with Your Tablet PC
- Numbered Buttons
- Enter Button
- Setting Passwords
- Setting Supervisor Password
- Setting User Password
- From Off State
- From Standby/Hibernation State
- Incorrect Password Entry
- Low Battery Operations
- Uninstalling the Security Panel Application Software
- Removing Security Panel Application with Passwords Still Active
- Reinstalling the Security Panel Application
- Using Your Stylistic ST5000 Series Tablet PC
- 2
- System States
- Powering Up the Tablet PC
- Shutting Down the System
- Suspending System Operation
- Resuming System Operation
- Adjusting the Display Brightness
- Using the Pen
- Calibrating the Pen
- Installing a Pen Tether
- Replacing the Pen Tip
- Charging the Battery
- Removing and Installing the Battery
- Tips for Conserving Battery Power
- Operation of the Bridge Battery
- Installing a PC Card
- Removing a PC Card
- Installing a Memory Module
- Removing a Memory Module
- Care and
- Maintenance
- 3
- Protecting the Display Screen
- Storing the Tablet PC
- Avoiding Overheating
- Cleaning the Display Screen
- Troubleshooting
- System Will Not Resume Operation
- Display Screen Blank or Difficult to Read
- Cursor Is Not Tracking Pen
- Infrared Data Transfer Is Not Working
- Tablet PC is Not Responding to the Pen
- Speaker/Headphone Volume Too Low
- Configuring Peripheral Interfaces
- Creating a Backup Image
- Enlarging the Backup Partition
- Restoring a Backup Image
- Re-Installing Individual Drivers and Applications
- Specifications
- 4
- 5
- Appendix Wireless LAN* User’s Guide
- FCC Regulatory Information
- Regulatory Notes and Statements
- Federal Communications Commission statement
- FCC Interference Statement
- FCC Radio Frequency Exposure statement
- Canadian Notice
- Types of Wireless LANs Covered by this Document
- Characteristics of the Device
- Wireless LAN Modes Using this Device
- How to Handle This Device
- Deactivation using the wireless switch
- Deactivation using Windows
- 1. Click [Start] --> [(All) Programs] --> [Intel Net work Adapters] --> [Intel(R) PROSet]. The Intel(R) PROSet window will be displayed.
- 2. Click the General tab.
- 3. Select [Off] for the wireless communications Switch Radio: function, and then click the [OK] button. Wireless communications on/off switching will be deactivated and the transmission of radio waves from the wireless LAN will be stopped.
- 1. Click [Start] --> [Control Panel] --> [Atheros Cli ent Utility]. The Atheros Wireless Configuration Utility window will be displayed.
- 2. Click the Wireless Networks tab.
- 3. Click the [Enable Radio] box to clear it, then click the [OK] button. Wireless communications on/off switching will be deactivated and the transmission of radio waves from the wireless LAN will be stopped.
- Starting Transmission
- 1. Set the wireless switch to the On position.
- 2. Click [Start] --> [(All) Programs] --> [Intel Net work Adapters] --> [Intel(R) PROSet]. The Intel(R) PROSet window will be displayed.
- 3. Click the [General] tab if it is not already selected.
- 4. Select [ON] for the Switch radio: function, then click [OK]. Wireless communications on/off switching will be activated and the transmission of radio waves will be restarted.
- 1. Click the Wireless Network Connection icon in the system tray at the lower right of your screen.
- 2. Click [Enable Radio]. The radio will be turned on. Access Point Mode: Transmission is enabled. Ad Hoc Mode: Restart your computer to enable the radio.
- Flow of operations
- 1. Make sure the mobile computer is ready for the transmission of radio waves from the wireless LAN. For further details, see (See Starting Transmission on page 52 for more information.).
- 2. Assign the parameters required for wireless LAN connection. (See Preparation for wireless LAN con nection on page 53 for more information.).
- 3. Perform setting operations relating to network con nection. (See Connection to the network on page 55 for more information.)
- Preparation for wireless LAN connection
- Assigning parameters
- 1. Make sure the Wireless LAN switch is switched on.
- 2. Click the [Start] button first and then [Control Panel].
- 3. If the Control Panel is in Category view, switch to Classic view by clicking “Switch to Classic View” under Control Panel the left frame. (If you are already in Classic view, “Switch to Category View” will be displayed instead.)
- 4. Double-click the Network Connections icon. A list of currently installed networks will be displayed.
- 5. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis played. The [Wireless Network Connection Proper ties] window will be displayed.
- 6. Click the [Wireless Networks] tab.
- 7. Click [Refresh], then choose the correct SSID from the [Available Networks] window. Click [Config ure] and proceed to step 7. If the SSID of your access point does not appear in the list, click [Add]. The [Wireless Network Properties] wind...
- 8. Select the Association tab if it is not already selected.
- 9. Enter the information required for connection to the wireless LAN.
- 10. Enter the WEP key for encoding communications data.
- 11. Click the [Authentication] tab and then verify the settings of [Enable network access control using IEEE 802.11x].
- 12. After completion of setting operations, click the [OK] button. Processing will return to the [Wire less Network Connection Properties] window.
- 13. Verify that the network name entered in step 7 above is added in [Preferred Networks], and then click the [OK] button.
- 14. Close the [Wireless Network] window.
- Connection to the network
- Setting the network
- Setting TCP/IP
- 1. Click the [Start] button first and then [Control Panel].
- 2. If the Control Panel is in Category view, switch to Classic view by clicking “Switch to Classic View” under Control Panel the left frame. (If you are already in Classic view, “Switch to Category View” will be displayed.)
- 3. Double-click [Network Connections]. A list of cur rently installed networks will be displayed.
- 4. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis played. The [Wireless Network Connection Proper ties] window will be displayed.
- 5. Click the [General] tab if it is not already selected.
- 6. Click [Internet Protocol (TCP/IP] and then click [Properties]. The [Internet Protocol (TCP/IP) Properties] window will be displayed.
- 7. Set the IP address as follows:
- 8. Click the [OK] button. Processing will return to the [Wireless Network Connection Properties] window.
- 9. Click the [OK] button.
- 10. Close the [Network Connection] window.
- Confirming the computer and work group names
- 1. Click the [Start] button, then [Control Panel].
- 2. If the Control Panel is in Category view, switch to Classic view by clicking “Switch to Classic View” under Control Panel the left frame. (If you are already in Classic view, “Switch to Category View” will be displayed.)
- 3. Double-click the [System] icon. The [System Prop erties] window will be displayed.
- 4. Click the [Computer Name] tab.
- 5. Confirm the settings of [Full computer name:] and [Workgroup:].
- 6. Click the [OK] button. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer.
- Setting the sharing function
- Setting the Microsoft network-sharing service
- 1. Click the [Start] button first and then [Control Panel].
- 2. If the Control Panel is in Category view, switch to Classic view by clicking “Switch to Classic View” under Control Panel the left frame. (If you are already in Classic view, “Switch to Category View” will be displayed.)
- 3. Double-click [Network Connections]. A list of cur rently installed networks will be displayed.
- 4. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis played. The [Wireless Network Connection Proper ties] window will be displayed.
- 5. If [File and Printer Sharing for Microsoft Net works] is displayed, proceed to step 6. If [File and Printer Sharing for Microsoft Networks] is not dis played, skip to step 7.
- 6. Make sure that the [File and Printer Sharing for Microsoft Networks] check box is checked, and then click the [OK] button. Skip to “Setting file- sharing function”.
- 7. Click [Install]. The [Select Network Component Type] window will be displayed.
- 8. Click [Service], then click the [Add] button. The [Select Network Service] window will be displayed.
- 9. Click [File and Printer Sharing for Microsoft Net works] and then click the [OK] button. Processing will return to the [Wireless Network Connection Properties] window, and [File and Printer Sharing for Microsoft Networks] will be added to the list.
- 10. Click the [Close] button.
- Setting the file-sharing function
- 1. Click the [Start] button first and then [My Com puter].
- 2. Double-click [Local disk (C:)].
- 3. Right-click the “work” folder (or whichever folder you want to share), and then click [Sharing and Security...] in the menu displayed. The [Folder Name Properties] window will be displayed.
- 4. Click [Sharing] if it isn’t already selected.
- 5. Click the link stating “If you understand the secu rity risks, but want to share files without running the wizard, click here”.
- 6. Click “Just enable file sharing” and click [OK].
- 7. Check the [Share this folder on the network] check box.
- 8. Click the [OK] button. The folder will be set as a sharable folder, and the display of the icon for the “work.” folder will change.
- Setting the printer-sharing function
- 1. Click the [Start] button first and then [Printers and FAX]. A list of connected printers will be displayed.
- 2. Right-click the printer for which the sharing func tion is to be set, and then click [Sharing] in the menu displayed. The property window correspond ing to the selected printer will be displayed.
- 3. Click the [Sharing] tab.
- 4. Click [Share this printer].
- 5. Enter the sharing printer name in [Share name].
- 6. Click the [OK] button.
- Confirming connection
- Connecting your personal computer to another personal computer
- 1. Click [Start] first and then [My Computer]. The [My Computer] window will be displayed in the left frame.
- 2. Click [My Network Places] in the “Other Places” list. The window [My Network Places] will be dis played.
- 3. Click [View workgroup computers] under Network Tasks in the left frame.
- 4. Double-click the personal computer to which your personal computer is to be connected. The folder that was specified in “Setting the file-sharing func tion” on page 56 will be displayed.
- 5. Double-click the folder to be accessed.
- Confirming the status of the radio
- 1. Click [Start] -> [All Programs] -> [Intel Network Adapters] -> [Intel(R) PROSet]. The [Intel(R) PROSet] window will be displayed.
- 2. Click the [General] tab and confirm radio status in the window displayed. The current connection sta tus will be displayed.
- 1. Right-click the Atheros icon in the lower right cor ner of the screen.
- 2. Click [Open Client Utility]. The Atheros Wireless Configuration Utility window opens.
- 3. Contained within the Current Status tab and Advanced Current Status, you will find the current operating status of the radio. (When the radio is turned off or the computer is not yet connected, some of the conditions will not be displayed.)
- Setting of power-saving function
- 1. Click [Start] -> [(All) Programs] -> [Intel Network Adapters] -> [Intel(R) PROSet]. The Intel(R) PROSet window will be displayed.
- 2. Click the [Adapter] tab.
- 3. Click the [Configure] button in [Power settings]. The [Power settings] window will be displayed.
- 4. Select [Manual], and adjust the bar to set the power- saving function.
- Setting of transmission power during ad hoc connection
- 1. Click [Start] -> [(All) Programs] -> [Intel Network Adapters] -> [Intel(R) PROSet]. The Intel(R) PROSet window will be displayed.
- 2. Click the [Adapter] tab.
- 3. Click the [Configure] button in [Power settings]. The [Power settings] window will be displayed.
- 4. Adjust the “Transmission Power (Ad Hoc)” bar to set the transmission power.
- Setting of channels during ad hoc connection
- 1. Click [Start] -> [(All) Programs] -> [Intel Network Adapters] -> [Intel(R) PROSet]. The Intel(R) PROSet window will be displayed.
- 2. Click the [Adapter] tab.
- 3. Click the [Configure] button in [Ad hoc settings]. The [Ad hoc settings] window will be displayed.
- 4. Change channels during ad hoc connection by selecting a new channel from the drop down list.
- 5. Click [OK].
- 1. Click on the My Computer icon. Select [View sys tem information] from the left frame.
- 2. Select the Hardware tab and click [Device Manager].
- 3. Double-click “Atheros BCM4306 Wireless LAN Adapter” under [Network Adapters].
- 4. In the Atheros BCM4306 Wireless LAN Adapter window, select the Advanced tab.
- 5. Select IBSS Channel Number from the list, and change the value from the [Value:] dropdown list to the desired channel.
- 6. Click [OK].
- Unavailable network connection
- Unavailable network connection
- (continued)
- Communication is disconnected soon after connection to the access point
49
Wireless LAN User’s Guide
FCC REGULATORY INFORMATION
Please note the following regulatory information related to the
optional wireless LAN device.
Regulatory Notes and Statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wire-
less LAN devices. The energy levels of these emissions, however,
are far much less than the electromagnetic energy emissions
from wireless devices such as mobile phones. Wireless LAN
devices are safe for use by consumers because they operate
within the guidelines found in radio frequency safety standards
and recommendations. The use of Wireless LAN devices may
be restricted in some situations or environments, such as:
• On board an airplane, or
• In an explosive environment, or
• In situations where the interference risk to other devices
or services is perceived or identified as harmful.
In cases in which the policy regarding use of Wireless LAN
devices in specific environments is not clear (e.g., airports,
hospitals, chemical/oil/gas industrial plants, private buildings),
obtain authorization to use these devices prior to operating the
equipment.
Regulatory Information/Disclaimers
Installation and use of this Wireless LAN device must be in
strict accordance with the instructions included in the user
documentation provided with the product. Any changes or
modifications made to this device that are not expressly
approved by the manufacturer may void the user’s authority to
operate the equipment. The manufacturer is not responsible for
any radio or television interference caused by unauthorized
modification of this device, or the substitution or attachment
of connecting cables and equipment other than those specified
by the manufacturer. It is the responsibility of the user to
correct any interference caused by such unauthorized modifica-
tion, substitution or attachment. The manufacturer and its
authorized resellers or distributors will assume no liability for
any damage or violation of government regulations arising
from failure to comply with these guidelines.
Federal Communications Commission statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause interference, and, (2) This device must
accept any interference, including interference that may cause
undesired operation of this device.
FCC Interference Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio
frequency energy. If not installed and used in accordance with
the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try and correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the
receiver.
3. Connect the equipment to an outlet on a circuit different
from the one the receiver is connected to.
4. Consult the dealer or an experienced radio/TV technician
for help.
FCC Radio Frequency Exposure statement
This Wireless LAN radio device has been evaluated under FCC
Bulletin OET 65C and found compliant with the requirements
as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b)
(4) addressing RF Exposure from radio frequency devices. The
radiated output power of this Wireless LAN device is far below
the FCC radio frequency exposure limits.
(The maximum SAR value measured from this device was
0.36 W/kg.)
Export restrictions
This product or software contains encryption code which may
not be exported or transferred from the US or Canada without
an approved US Department of Commerce export license. This
device complies with Part 15 of FCC Rules., as well as ICES 003
B / NMB 003 B. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received,
including interference that may cause undesirable operation.
Modifications not expressly authorized by Fujitsu PC Corpora-
tion may invalidate the user's right to operate this equipment.
Canadian Notice
To prevent radio interference to the licensed service, this device
is intended to be operated indoors and away from windows to
provide maximum shielding. Equipment (or its transmit
antenna) that is installed outdoors is subject to licensing.
Ocampa_UG_Active B.book Page 49 Monday, September 29, 2003 5:04 PM