Copyright Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. Because ongoing development efforts are made to continually improve the capabilities of our products, however, the data contained herein represents Fujitsu design objectives and is provided for comparative purposes; actual results may vary based on a variety of factors. This product data does not constitute a warranty. Specifications are subject to change without knowledge.
Stylistic ST5000 Series Tablet PC - User’s Guide
Ta b l e o f C o n t e n t s Table of Contents PREFACE About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . v Fujitsu Contact Information . . . . . . . . . . . . . . . . . v Warranty Information . . . . . . . . . . . . . . . . . . . . . v 1 GETTING STARTED WITH YOUR TABLET PC 25 25 25 26 26 27 27 27 28 28 3 Getting Started In-box Items for the Stylistic ST5000 Series Tablet PC . . . . . . . . . . . . . . . . . . 1 Optional Accessories . . . . . . . . . . . . . . . . . . . . . .
Stylistic ST5000 Series Tablet PC User’s Guide 5 AGENCY NOTICES Regulatory Information Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 APPENDIX: WIRELESS LAN USER’S GUIDE Before Using the Wireless LAN For better communications. . . . . . . . . . . . . . . . . 53 Stopping transmission . . . . . . . . . . . . . . . . . . . . 54 Starting Transmission . . . . . . . . . . . . . . . . . . . . . 54 Connecting the WLAN Flow of operations . . . . . . . . . . . . . . . . . . . . . . .
Preface
Stylistic ST5000 Series Tablet PC User’s Guide – Preface
Preface Preface ABOUT THIS GUIDE The Stylistic ST5000 Series Tablet PC is a highperformance, pen-based computer that has been designed to support MicrosoftWindows XP Tablet PC Edition. This manual explains how to operate your Fujitsu Stylistic ST5000 Series Tablet PC’s hardware and built-in system software. The Stylistic ST5000 Series Tablet PC is a completely selfcontained unit with an active-matrix (TFT) color LCD display and an active digitizer.
Stylistic ST5000 Series Tablet PC User’s Guide – Preface
1 Getting Started with Your Tablet PC
Stylistic ST5000 Series Tablet PC User’s Guide – Section One
Getting Started Getting Started with Your Stylistic Tablet PC Figure 1-1. Stylistic ST5000 Series Tablet PC The Stylistic ST5000 Series Tablet PC is a highperformance, pen-based computer that has been designed to support Microsoft Windows XP Tablet PC Edition. This chapter provides an overview of the Stylistic ST5000 Series Tablet PC and its features.
Stylistic ST5000 Series Tablet PC User’s Guide – Section One OPTIONAL ACCESSORIES The following optional accessories can be used with the Stylistic ST5000 Series Tablet PC. Refer to the instructions provided with these accessories for details on their use.
Getting Started STYLISTIC TABLET PC FEATURES Features and controls that you use to operate the Stylistic ST5000 Series Tablet PC are outlined below and illustrated in Figures 1-1 through 1-5. Details on using these features and controls are provided later in this manual. Infrared Keyboard/ Mouse Port Speaker System Status LEDs Power On/Suspend/ Resume Button User-Programmable Application Buttons Built-in Microphone Infrared Keyboard/ Mouse Port Navigation Buttons Figure 1-2.
Stylistic ST5000 Series Tablet PC User’s Guide – Section One Memory Module Cover System Interface Connector Battery Release Latch Battery Tablet Dock Latch Points Thermal Suede Wireless LAN* On/Off Switch Figure 1-3. Stylistic ST5000 Series Tablet PC Features (Back View) * The system is configured with one of two modules: a standard modem/LAN module or an optional wireless LAN/LAN/ modem combo module. Back Features: • System interface connector: Allows you to connect the optional Stylistic Tablet Dock.
Getting Started Pen Holder Pen Tether Point PC Card Slot PC Card Eject Button Air flow vents SD Card/Memory Stick Slot IrDA/FIR Port Smart Card Slot Figure 1-4. Stylistic ST5000 Series Tablet PC Features (Top View) Top Features: 1 • Pen: The main input device that you use to execute programs and enter data. A pen holder is built into the Tablet PC to store the pen when not in use. • Pen Tether Point: The pen tether point is used to attach a pen tether to help prevent loss of the pen.
Stylistic ST5000 Series Tablet PC User’s Guide – Section One External Monitor Connector (behind cover) IEEE 1394 Jack LAN Jack* Microphone Jack Modem Jack* Kensington™ Lock Slot Headphone Jack USB 2.0 Ports DC Input Jack Latch Point Figure 1-5. Stylistic ST5000 Series Tablet PC Features (Left Side View) * The system is configured with one of two modules: a standard modem/LAN module or an optional wireless LAN/LAN/ modem combo module. Left-Side Features: 1 • USB 2.
Getting Started Infrared Keyboard/Mouse Port Optional Wireless LAN location Pen / Pen Holder Latch Point Figure 1-6. Stylistic ST5000 Series Tablet PC Features (Right Side View) Right-Side Features: 1 • Pen: The main pointing device that you use to execute programs and enter data. A pen holder is built into the Tablet PC to store the pen when not in use.
Stylistic ST5000 Series Tablet PC User’s Guide – Section One STATUS DISPLAY Icons appear under each of the system status LEDs in the status display indicating the status of system functions such as system power and battery charge level. The location of icons in the Status display is shown in Figure 1-7. Table 1-2. explains how the LEDs associated with the individual icons are displayed, and describes what the variations of that display indicate.
Getting Started In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at the rate of one second on, five seconds off. Icon Battery Mode/State LED State Remarks • On State Green, continuous Battery charge is between 50%-100% • Idle Mode Amber, continuous Battery charge is between 13%-49% Red, continuous Battery charge is between 0%-12% Red, blinking There is a battery error.
Stylistic ST5000 Series Tablet PC User’s Guide – Section One APPLICATION BUTTONS The six application buttons are located on the upper right-hand side of a vertically-oriented system. (See figure 1-2 on page 3 for location). Five of the buttons have secondary functions. The secondary functions are activated by pressing the Function (Fn) button while pressing the application button. The buttons also have separate tertiary functions that can be used while the system is booting up.
Getting Started Button Icon and Name Tablet Icon (Fn + Button) (Primary) (Secondary) Description The Escape application button acts the same way as an Escape key on a keyboard. Escape Button Application A Button When you press the Fn + Esc buttons at the same time*, they act to invoke a predetermined application or generate a combination keystroke, as assigned in the Tablet Button Settings utility. (You can change the settings in Control Panel -> Tablet Button Settings).
Stylistic ST5000 Series Tablet PC User’s Guide – Section One NAVIGATION BUTTONS The two navigation buttons are located on the lower right-hand side of a vertically-oriented system. (See figure 1-2 on page 3 for location). Each of the buttons can be toggled by pressing either end of the button. The buttons have dual functions. The secondary functions are activated by pressing the Function (Fn) button while pressing the application button*.
Getting Started TERTIARY FUNCTIONS OF APPLICATION AND NAVIGATION BUTTONS While you are booting up your system, the Application Buttons and Navigation buttons can be used for entering and navigating through the Basic Input-Output System (BIOS), and for invoking the Advanced Options Menu, where you can enter different modes (such as Safe Mode).
Stylistic ST5000 Series Tablet PC User’s Guide – Section One SECURITY FUNCTIONS OF APPLICATION BUTTONS Five buttons are used when implementing security functions. Four of the buttons are used to enter the password, and the fifth is used as an Enter button. Instructions for using the security feature follow the table.
Getting Started Setting Supervisor Password You must have set a supervisor password before setting any user passwords. The supervisor password can bypass the user password. 1. Go to the Start menu. 2. Click on Run. 3. Type in: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\ FJSECS.EXE, then press [Enter] 4. Follow the on-screen instructions to set the Supervisor password. Setting User Password 1 Go to the Start menu. 2. Click on All Programs. 3.
Stylistic ST5000 Series Tablet PC User’s Guide – Section One Removing Security Panel Application with Passwords Still Active Using this feature will not allow any changes to the password. Removing the applications does not remove the password. It simply removes the utility to change/add/remove passwords. To change your password you must reinstall the application. User: 1. Go to Start -> Control Panel. 2. Open Add or Remove Programs Properties in the Control Panel. 3.
Getting Started CONNECTORS AND PERIPHERAL INTERFACES Connectors and peripheral interfaces on the Stylistic ST5000 Series Tablet PC allow the connection of a variety of devices. Specific locations are illustrated in Figures 1-2 through 1-5. Connector/ Peripheral Tablet PC Icon Table 1-7 provides a description of each peripheral connector on the Stylistic ST5000 Series Tablet PC. Each of the illustrated icons is either molded into or printed on the Tablet PC chassis.
Stylistic ST5000 Series Tablet PC User’s Guide – Section One Connector/ Peripheral Tablet PC Icon Purpose Infrared keyboard/ mouse port An infrared receiver built into the Tablet PC allows you to communicate with a Fujitsu wireless infrared keyboard or mouse. The keyboard infrared port works optimally when it is placed between 10 to 30 cm (approximately 4 in. to 12 in.) from the keyboard infrared port (which is located on the bottom edge of the Tablet PC).
2 Using Your Stylistic ST5000 Series Tablet PC 19
Stylistic ST5000 Series Tablet PC User’s Guide – Section Two 20
U s i n g Yo u r S t y l i s t i c S T 5 0 0 0 Using the Stylistic ST5000 Series Tablet PC This chapter covers the fundamental concepts, basic system operation and use, and system functions of the Stylistic ST5000 Series Tablet PC. You should familiarize yourself with this information before you attempt to operate the system. Prior to using your system, be sure to fully charge the battery if you plan to run on battery power. Failure to do so may result in erratic performance.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Two Icon Appearance Power icon displayed continuously Power icon blinking To Change State* Current State On State or Idle State To enter the Off state, shut down the system using the Start menu on your system. To enter Suspend-to-RAM or Hibernate (Save-to-Disk)† state, suspend system operation using either a hardware or software suspend. Suspend-toRAM† To enter the On state, resume system operation by pressing the Suspend/ Resume button.
U s i n g Yo u r S t y l i s t i c S T 5 0 0 0 To suspend system operation: 1. Press the Suspend/Resume button, or carry out the Standby command from your operating system or power management program. (If your system is configured to suspend operation using Hibernate (Save-to-Disk) mode, which is explained later in this procedure, a message is displayed while data is saved to your hard disk.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Two RESUMING SYSTEM OPERATION To resume operation from either Suspend-to-RAM or Hibernate modes, press the Suspend/Resume button. ■ ■ From Suspend-to-RAM mode Status lights indicate that the system state is changing. It may take up to a minute before the system returns to the On state and system operation resumes. Note that the display turns on shortly before the pen becomes active due to the power-up sequences observed by the system.
U s i n g Yo u r S t y l i s t i c S T 5 0 0 0 when used in combination with the tip switch, corresponds to the right mouse button. The rear toggle of the barrel button switch acts as an electronic ink “eraser”. Pen tether attachment point • Ensure that a screen protector is installed on the Tablet PC screen before you use the pen. The warranty does not cover a scratched screen. • Use only the pen provided with your Tablet PC.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Two CHARGING THE BATTERY REMOVING AND INSTALLING THE BATTERY The Stylistic ST5000 Series battery can be charged while it is installed in the Tablet PC. The battery can be removed from the Tablet PC and swapped with a charged battery. The battery can then be charged in an external charger if one is available. To remove the battery from the Tablet PC: To do so: 1.
U s i n g Yo u r S t y l i s t i c S T 5 0 0 0 TIPS FOR CONSERVING BATTERY POWER You can extend the charge life of your battery by conserving battery power. (Your results may vary depending on your application and how the system is configured.) Here are some suggestions to help you conserve battery power: • Use an external power source such as the AC adapter whenever the system is docked. • Suspend system operation if you know that you won’t be using the system for a while.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Two Installing Memory Stick/SD Cards Memory Sticks and SD Cards are installed in the Memory Stick/SD Card slot (Figure 1-4). To install a Memory Stick or SD Card, follow these steps: ■ ■ Installing or removing a Memory Stick or SD Card during your Tablet PC’s shutdown or bootup process may damage the card and/or your computer.
U s i n g Yo u r S t y l i s t i c S T 5 0 0 0 Installing a Memory Module To install a DIMM module in the Tablet PC: Removing a Memory Module To remove a DIMM module: 1. Ensure that the Tablet PC is off. To do so, carry out the Shut Down command in the Start menu. (Do not attempt to remove or install a DIMM module when the system is in Suspend mode or running.) 1. Ensure that the Tablet PC is off. To do so, carry out the Shut Down command in the Start menu.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Two 30
3 Care and Maintenance 31
Stylistic ST5000 Series Tablet PC User’s Guide – Section Three 32
Care and Maintenance Care and Maintenance This chapter gives you pointers on how to care for and maintain your Stylistic ST5000 Series Tablet PC. During normal use of the Tablet PC, small particles from the environment can become embedded in the pen tip and scratch the screen. To prevent scratching the screen, ensure that a screen protector is installed before using your Tablet PC. The warranty does not cover a scratched screen.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Three 3. Apply the screen protector to the display screen surface. When doing so, orient the screen protector with the adhesive side of the screen protector facing the display screen and the notched corner of the screen protector oriented as shown in Figure 3-2. STORING THE TABLET PC Store the Stylistic ST5000 Series Tablet PC in the Off state with a fully charged battery installed.
Care and Maintenance critically low level, the system is forced into Suspendto-RAM mode to avoid a total system power failure. To correct this problem, either connect an external power supply (such as the AC adapter), or install a charged battery in the Tablet PC. • The system may be at the critical thermal limit. To avoid damage to heat-sensitive components, the system enters Suspend-to-RAM mode when it gets too hot.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Three ■ ■ In order to install applications and/or drivers from the DAR CD, you will need to connect an external CD drive to your system.
Care and Maintenance 2. After you click [Y]es. You will be presented with two options: [Create New Backup] and [Restore Backup]. After you click [Create New Backup], follow the onscreen instructions. By selecting [Create New Backup], a new image will be written to your backup partition. This will overwrite any previously created image. Creating a backup image from the desktop To create a backup image from the desktop, select Drive Image SE from the Program list.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Three 38
4 Specifications 39
Stylistic ST5000 Series Tablet PC User’s Guide – Section Four 40
System Specifications Stylistic ST5000 Series Hardware Specifications The following table provides general hardware specifications of the Stylistic ST5000 Series Tablet PC by category. Stylistic ST5000 Specifications (Continued) VRAM Stylistic ST5000 Specifications Physical Specifications Dimensions 8.66" w x 12.77" d x 0.82"-0.88" h (220 mm x 324.4 mm x 20.9-22.3 mm) Weight 3.4 lbs. (1.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Four Stylistic ST5000 Specifications (Continued) Status Indicators (LEDs) Stylistic ST5000 Specifications (Continued) • Power Agency Approval Specifications • Charge/DC-In • EN55022 (CISPR22) Class B • Battery level Emissions • HDD • VCCI CLass B • Security Power Specifications Main Battery Immunity • EN55024 (1998) Safety • UL and cUL Listed, UL 60950, 3rd edition • 6-cell • Removable, Lithium ion • CB Report, IEC 60950, 3rd Edition •
5 Agency Notices 43
Stylistic ST5000 Series Tablet PC User’s Guide – Section Five 44
Agency Notices Regulatory Information NOTICE Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Five DOC (INDUSTRY CANADA) NOTICES Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numérique de la class B respecte toutes les exigence du Réglement sur le matérial brouilleur du Canada.
Agency Notices UL Notice This unit requires an AC adapter to operate. Use only UL Listed Class 2 Adapters with an output rating of 16 VDC, with a current of 3.75A minimum. AC Adapter output polarity: + The modem-to-telephone network connection must be a line cord using a minimum #26 AWG wire. For Authorized Repair Technicians Only ■ For continued protection against risk of fire, replace only with the same type and rating fuse. ■ Danger of explosion if Lithium (clock) battery is incorrectly replaced.
Stylistic ST5000 Series Tablet PC User’s Guide – Section Five 48
Appendix Wireless LAN* User’s Guide * Optional device 49
Stylistic ST5000 Series Tablet PC User’s Guide – Appendix 50
W i r e l e s s L A N U s e r ’s G u i d e FCC REGULATORY INFORMATION Please note the following regulatory information related to the optional wireless LAN module. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
Stylistic ST5000 Series Tablet PC User’s Guide – Appendix Before Using the Wireless LAN The Integrated Wireless LAN is a standard device on Stylistic ST5000 Tablet PC’s, and an option on Stylistic ST5000D Tablet PC’s. This manual describes the basic operating procedures for the wireless LAN (referred to as the “wireless module” in this manual) and how to set up a wireless LAN network. Before using this wireless module, read this manual carefully to ensure correct operation of the device.
W i r e l e s s L A N U s e r ’s G u i d e Figure A-2. Access Point (Infrastructure) Mode Network Wired LAN Internet ADSL modem, cable modem, or similar Access Point* Wireless LAN * An optional hub for a wired LAN may be required depending upon the type of access point used.
Stylistic ST5000 Series Tablet PC User’s Guide – Appendix STOPPING TRANSMISSION To use this product inside hospitals, clinics, or airplanes, or in other places where the use of electronic equipment is regulated, stop the transmission of radio waves from the wireless LAN beforehand. Deactivation using the wireless switch The transmission of radio waves from the wireless LAN can be stopped by setting the wireless switch to the Off position.
W i r e l e s s L A N U s e r ’s G u i d e Connecting the WLAN FLOW OF OPERATIONS The wireless LAN connection procedure contained in this section is outlined below. 1. 2. 3. Make sure the mobile computer is ready for the transmission of radio waves from the wireless LAN. For further details, see (See Starting Transmission on page 54 for more information.). Assign the parameters required for wireless LAN connection. (See Preparation for wireless LAN connection on page 55 for more information.).
Stylistic ST5000 Series Tablet PC User’s Guide – Appendix For ad hoc connection: Assign the same network name to all the personal computers to be connected. For access point (infrastructure) connection: Assign the appropriate SSID. The SSID must be identical to the SSID of the access point. Refer to the access point manual, or contact your network administrator. b. For ad hoc connection, check the following field.
W i r e l e s s L A N U s e r ’s G u i d e CONNECTION TO THE NETWORK This section explains connection to the network. If there is an administrator of the network, contact the network administrator for data settings. Following this operation, confirm the names of the computer and the workgroup as follows. Confirming the computer and work group names To modify the computer name and/or the work group name, you need to be logged in from Windows as an administrator.
Stylistic ST5000 Series Tablet PC User’s Guide – Appendix This operation is not required unless the sharing function is to be used. 2. Double-click [Local disk (C:)]. 3. Right-click the “work” folder (or whichever folder you want to share), and then click [Sharing and Security...] in the menu displayed. The [Folder Name Properties] window will be displayed. The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network.
W i r e l e s s L A N U s e r ’s G u i d e 5. Enter the sharing printer name in [Share name]. 6. Click the [OK] button. ■ Mode If access point (infrastructure) connection is in use, “Infrastructure (AP)” will be displayed. If ad hoc connection is in use, “Ad hoc (Peer-to-peer)” will be displayed. ■ Security Displays the encryption type currently used by the radio. ■ Speed Displays the current data rate used by the radio to transmit and receive data.
Stylistic ST5000 Series Tablet PC User’s Guide – Appendix 60 ■ IP Address Displays the current TCP/IP address assigned to the WLAN adapter. ■ Country The country with the country code for which the radio is configured. ■ Transmit Power Level Displays the current transmit power level of the radio. ■ Network Name (SSID) Displays the Network Name (SSID) currently used by the radio. ■ Power Save Mode Displays the configured Power Save Mode currently used by the radio.
W i r e l e s s L A N U s e r ’s G u i d e Other settings SETTING OF POWER-SAVING FUNCTION You can set the power-saving function of wireless LAN. Default setting is auto-setting. In case of using the powersaving function, manually control the communication performance. Intel PROSet Wireless LAN: 1. Click [Start] -> [(All) Programs] -> [Intel Network Adapters] -> [Intel(R) PROSet]. The Intel(R) PROSet window will be displayed. 2. Click the [Adapter] tab. 3.
Stylistic ST5000 Series Tablet PC User’s Guide – Appendix Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Unavailable network connection Possible Cause Incorrect network name (SSID) or network key Possible Solution Ad hoc connection: verify that the network names (SSID’s) and network keys (WEP) of all computers to be connected have been configured correctly.
W i r e l e s s L A N U s e r ’s G u i d e Problem Unavailable network connection (continued) Possible Cause It takes too long to retrieve the network and display the connected computers. Possible Solution Retrieve computers as follow: 1. Click [Start] button, then click [Search]. 2. Click [Computers or people]. 3. Click [Computers on the network]. 4. Input the name of computer to be connected with in [Computer name] and click [Search]. 5. Double-click the icon of connected computer.
Stylistic ST5000 Series Tablet PC User’s Guide – Appendix Wireless LAN Glossary Access point A designation of wireless LAN network configurations. It indicates a form of communication using an Access Point. For details, refer to “access point connection” on page 52. Ad hoc A designation for wireless LAN network configuration. It indicates a form of communication limited to those personal computers which have wireless LAN function. For details, refer to “Ad hoc connection” on page 52.
W i r e l e s s L A N U s e r ’s G u i d e Open system authentication An 802.11 wireless LAN authentication method. Open System does not exchange any key or other information, it is a simple request by the mobile station to be authenticated without verifying identity. PPPoE (Point to Point Protocol over Ethernet) A method of allowing the authentication protocol adopted in telephone line connection (PPP) to be used over an Ethernet. Protocol A procedure or rule of delivering data among computers.
Stylistic ST5000 Series Tablet PC User’s Guide – Appendix IP address information IP addressing is much more complicated than can be briefly explained in this document. You are advised to consult with your network administrator for additional information.
W i r e l e s s L A N U s e r ’s G u i d e Specifications Item Specification Type of network Conforms to IEEE 802.11a/802.11b/g (Wi-Fi based)* Transfer rate (Automatic switching) 54 Mbps maximum data rate Active frequency 802.11b/g: 2400~2473 MHz 802.11a: 4900 ~ 5850 MHz Number of channels 802.11a: 8 independent channels 802.11b/g: 11 channels, 3 non-overlapping channels Security Network name (SSID) Network key (64 bits/128 bits)** WPA 1.
Stylistic ST5000 Series Tablet PC User’s Guide – Appendix 68
Index Index A charge/DC input icon . . . . . . . . . . . . . . . . . . . . . . . . . . .8 adjusting the display brightness . . . . . . . . . . . . . . . . . 24 charging the battery pack . . . . . . . . . . . . . . . . . . . . . . .26 air flow vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 cleaning the display screen . . . . . . . . . . . . . . . . . . . . . .34 application buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 application A . . . . . . . . . . .
Stylistic ST5000 Series Tablet PC I idle state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 IEEE 1394 jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 18 power options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 storage options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 overheating, avoiding . . . . . . . . . . . . . . . . . . . . . . . . . .34 infrared data transfer not working . . . . . . . . . . . . . .
Index SD Card Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Idle state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Off state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 On state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Suspend-to-RAM . . . . . . . . . . . . . . . . . . . . . . . . . . .21 SD Card slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stylistic ST5000 Series Tablet PC 72
