User's Manual

54
STO PPING TRANSM ISSIO N
To use this product inside hospitals, clinics, or airplanes,
or in other places where the use of electronic equipment
is regulated, stop the transmission of radio waves from
the wireless LAN beforehand.
Deactivat ion using the w ireless sw itch
The transmission of radio waves from the wireless LAN
can be stopped by setting the wireless switch to the Off
position. Note that the wireless LAN On/Off switch has
no effect on non-wireless LAN models.
(See Figure 3 for Wireless LAN switch location.)
Figure A-3. W ireless LAN O n/ Off Sw it ch
Deactivat ion using W indow s
Intel PROSet Wireless LAN :
1. Click [Start] --> [ (All) Programs] --> [ Intel Net-
work Adapters] --> [Intel(R) PROSet] . The
Intel(R) PROSet window will be displayed.
2. Click the General tab.
3. Select [ Off ] for the wireless communications
Switch Radio: function, and then click the [ OK]
button. Wireless communications on/off switching
will be deactivated and the transmission of radio
waves from the wireless LAN will be stopped.
Atheros Wireless LAN
1. Click [Star t] --> [ Control Panel] --> [ Atheros Cli-
ent Utility] . The Atheros Wireless Configuration
Utility window will be displayed.
2. Click the Wireless Networks tab.
3. Click the [ Enable Radio] box to clear it, then click
the [ OK] button. Wireless communications on/off
switching will be deactivated and the transmission
of radio waves from the wireless LAN will be
stoppe
d.
STARTING TRANSM ISSIO N
To communicate using the wireless LAN function, set
the computer to a status from which it can transmit, as
follows:
Intel PROSet Wireless LAN:
1. Set the wireless switch to the On position.
2. Click [ Start] --> [ (All) Programs] --> [ Intel Net-
work Adapters] --> [ Intel(R) PROSet] . The
Intel(R) PROSet window will be displayed.
3. Click the [General] tab if it is not already selected.
4. Select [ ON] for the Switch radio: function, then
click [ OK]. Wireless communications on/off
switching will be activated and the transmission of
radio waves will be restarted.
Atheros Wireless LAN:
1. Click the Wireless Network Connection icon in the
system tray at the lower right of your screen.
2. Click [ Enable Radio] . The radio will be turned on.
Access Poi nt M ode: Transmission is enabled.
Ad Hoc M ode: Restart your com puter to enable the
radio.
To restart t ransmission, select [O n] for the
w ireless communications Sw it ch Radio:
function, and then click the [O K] butt on.
W ireless LAN
O n/ O ff
Sw it ch
To rest art transmission, check t he [Enable
Radio] checkbox to select it., then click the
[O K] button.