User's Manual
Table Of Contents
- Unica Manual.pdf
- Preface
- Getting to Know Your LifeBook
- Getting Started with Your LifeBook
- User-Installable Features
- Troubleshooting Your LifeBook
- Care and Maintenance
- System Specifications
- Glossary
- Appendix A: Wireless Device User’s Guide
- Appendix B: Fingerprint Sensor Device
- Index
82
- Device Ports
LAN (RJ-45) Jack
Note that in order to use the internal LAN device directly with the system, you must first attach the included
external video/LAN adapter cable. When connected with the optional port replicator, you can connect
directly to the dedicated LAN port on the port replicator
The LAN (RJ-45) jack is used for a 10Base-T/100Base-Tx Ethernet LAN connection. You may need to
configure your notebook to work with your particular network. (Please refer to your network administrator
for information on your network configuration.) To connect the LAN cable follow these easy steps:
Connecting directly to the internal LAN
1
If connecting directly to the system, first connect the external video/LAN adapter cable to the port replicator
connector at the front of the system (Figure 36). Align the cable connector with the port replicator connector
and push the connector into the port until it is seated.
Figure 36. Connecting the LAN and Adapter
Figure 37. Connecting the LAN/Port Replicator
External Monitor/
LAN Adapter
LAN Cable