User Manual

6
−
39
Key Item Description
Individual
Alarm
Selecting ON
will generate the EtCO
2
alarm.
Selecting OFF
will not generate the EtCO
2
alarm.
Lower Alarm
Limit
Sets the lower alarm limit (1
〜
98mmHg, 0.1
〜
13.1kPa,
0.1
〜
13.1%). Setting a value equal to or below
1mmHg, 0.1kPa, 0.1% will turn the alarm OFF.
Upper Alarm
Limit
Sets the upper alarm limit (3
〜
100mmHg, 0.4
〜
13.3kPa, 0.3
〜
13.3%). Setting a value equal to or
above 100mmHg, 13.3kPa, 13.3% will turn the alarm
OFF.
Automatic
Setup
Automatically sets the upper alarm limit to
＋
10mmHg,
＋
1.3kPa,
＋
1.3% to the current value, and the lower
alarm limit to
−
10mmHg,
−
1.3kPa,
−
1.3% to the
current value.
InspCO
2
(Inspiratory CO
2
) Alarm
1. Press the InspCO
2
Alarm key to display the alarm setup menu.
Select ON/OFF of InspCO
2
alarm, and set the upper
alarm limit.
Set the alarm condition for each measurement unit
(mmHg / kPa / %).
Upper alarm limit can be set in increments of 1mmHg,
0.1kPa, 0.1%. Lower alarm limit can not be set.
NOTE
InspCO
2
alarm will not generate unless 2 or more respiration is detected
within 30 seconds after power ON or after discharge.
Key Item Description
Individual Alarm
Selecting ON will generate the InspCO
2
alarm.
Selecting OFF
will not generate the InspCO
2
alarm.
Upper Alarm
Limit
Sets the upper alarm limit (1
〜
4mmHg, 0.1
〜
0.4kPa,
0.1
〜
0.4%). Setting a value equal to or above
4mmHg, 0.4kPa, 0.4% will turn the alarm OFF.
Automatic
Setup
Automatically sets the upper alarm limit to
＋
3mmHg,
＋
0.4kPa,
＋
0.4% to the current measurement.
6
CO
2
Concentration