User Manual

6
−
9
ECG Source
The ECG source to display on the home display can be selected.
The alarm will be generated based on this selection.
The tabular trend and graphic trend will be also based on this selection.
1. Press the Config.
key to display the setup menu for selecting the ECG source.
2. Select a parameter.
Selecting ECG will measure the HR from ECG.
“HR” will be displayed inside the parameter key.
Selecting SpO
2
will measure the PR from SpO
2
.
“PR_SpO
2
” will be displayed inside the parameter key.
Selecting BP1 will measure the PR from BP1.
“PR_BP” will be displayed inside the parameter key.
Selecting Auto
will automatically set the measurable HR source in the priority of ECG
＞
SpO
2
＞
BP.
Automatic Lead Switching
By setting the Automatic Lead Switching ON, a new ECG lead will be automatically set when the
electrode comes off. When the lead off condition occurs, the

Check Electrodes

message will
be displayed and a new ECG lead will be automatically set if the Automatic Lead Switching is set
to ON.
Lead Switching
Auto Lead Selected
Type Electrode Off
ECG1 ECG2
RA ／ RA+C Ⅲ Ⅲ
LA ／ LA+C Ⅱ Ⅱ 5-electrode cable
C
Ⅱ aVR
RA
Ⅲ Ⅲ
4-electrode cable
LA Ⅱ Ⅱ
6
ECG