User's Manual

2
−
10
− To Start Monitoring −
Discharge Confirmation at Power ON
The monitor retains the trend and NIBP list data even when the power is turned OFF. If starting
to monitor a new patient, discharge procedure on the patient admit / discharge menu should be
performed.
To start monitoring a new patient, press the
Discharge key. The data before turning
ON the power will be erased and starts
monitoring.
Pressing the Continue
key will retain the
data before turning ON the power and starts
monitoring.
Reference
ON/OFF of this confirmation display can be selected.
Refer to “8. System Configuration Monitor Setup” for details.
To Admit a Patient
Enter the patient information on the patient admit / discharge menu.
1. Open the patient admit / discharge menu.
Press the Menu
→
Admit / Discharge
key.
The patient admit / discharge menu will be
displayed.
2. Enter the patient name and ID.
Press the Name key.
Enter the name using the numeric keypad.
The entered name will be displayed large on
the upper part of the display.