User's Manual

2
−
3
− Before Use − About the Home Display
About the Home Display
?
The home display appears immediately after the power is turned ON.
?
The waveforms and numeric data are displayed on the home display.
?
There are 2 modes of home display, “Standard Display (Home)” and “Numeric Data Enlarged
Display”, which can be switched by pressing the Home / Enlarge
key.
Reference
The home key function can be selected from Home / Enlarge or Home on the hospital
setup menu. The default setting is Home
.
Refer to “8. System Configuration Hospital Setup” for details.
Standard Display (max. 6 waveforms)
This display is focused on number of
waveforms to be displayed.
Up to 6 waveforms can be displayed.
Numeric Data Enlarged Display (max. 3 waveforms)
This display is focused on the visuality of
numeric data. Each numeric data will be
displayed large for easier view.
Up to 3 waveforms will be displayed on the
upper half of the display.
Reference
The displaying waveforms and numeric data can be selected as desired, and the configured
display can be programmed.
Refer to “4. Monitoring Setup To Configure the Display” for details.
2
Before Use